Another Bimmerlabs 330i tune thread

BeatMW_E90 · 04-20-2020, 11:47 AM

I was on a drive and only had my Bluetooth OBD scanner which connects to my phone via the Torque app so I cleared them and I will see if they come back,add then I will read with INPA, Which is not as hard to use as I thought (just a side note) LOL.
Loving the Bimmer tools software

con.fetti · 04-20-2020, 08:04 PM

Quote:

Originally Posted by Joe@TopGearSolutions

Quote:

Originally Posted by BeatMW_E90

I also am having issues, been having them for a while trying to get the 3 stage manifold tune from bimmerlabs installed.
Updated all the daten files through BMW Coding tool. Using a batch file from Bimmergeeks. file runs but WinKFP throws errors:
"File could not be opened for reading \DATA\gtaten\kfconf??.da2
"Error in file processing (general) .\DATA\gdaten\
"coapikfinit()failed
and the last one is a 99 error something in German I can't understand.

Anyone have ideas?

If you need help, I can remote in and install the BMW Standard Tools for you. Shoot me a PM if you need help.

Would you mind if I take you up on this offer as well? I want to be confident the tools are installed correctly on my end before I ever attempt the coding portion.

Joe@TopGearSolutions · 04-20-2020, 09:11 PM

Quote:

Originally Posted by con.fetti

Quote:

Originally Posted by Joe@TopGearSolutions

Quote:

Originally Posted by BeatMW_E90

I also am having issues, been having them for a while trying to get the 3 stage manifold tune from bimmerlabs installed.
Updated all the daten files through BMW Coding tool. Using a batch file from Bimmergeeks. file runs but WinKFP throws errors:
"File could not be opened for reading \DATA\gtaten\kfconf??.da2
"Error in file processing (general) .\DATA\gdaten\
"coapikfinit()failed
and the last one is a 99 error something in German I can't understand.

Anyone have ideas?

If you need help, I can remote in and install the BMW Standard Tools for you. Shoot me a PM if you need help.

Would you mind if I take you up on this offer as well? I want to be confident the tools are installed correctly on my end before I ever attempt the coding portion.

PM sent.

con.fetti · 04-21-2020, 03:12 PM

Quote:

Originally Posted by Joe@TopGearSolutions

PM sent.

Replied, thanks

hassmaschine · 04-21-2020, 04:51 PM

Quote:

Originally Posted by BeatMW_E90

Any ideas what these codes mean? I'm getting u0100 and u1100 which my searches point to a component losing communication with a computer. Car seems to run fine. Tested disa flaps with INPA and they cycled ok.

Just clear them. They're because during the flash, the DME goes offline, and the CAN bus can't talk to it, so the other modules throw a CAN communication error.

rjahl · 04-21-2020, 06:50 PM

Quote:

Originally Posted by hassmaschine

Quote:

Originally Posted by BeatMW_E90

Any ideas what these codes mean? I'm getting u0100 and u1100 which my searches point to a component losing communication with a computer. Car seems to run fine. Tested disa flaps with INPA and they cycled ok.

Just clear them. They're because during the flash, the DME goes offline, and the CAN bus can't talk to it, so the other modules throw a CAN communication error.

Two posts in one day, is this a resurgence or just stuck at home with the Covid 19 blues?

hassmaschine · 04-23-2020, 10:15 AM

a little bit of both - I doubt I'll ever post on forums regularly, but I have been trying to spend time updating and finishing several things.

Skoidat69 · 04-23-2020, 05:11 PM

Quote:

Originally Posted by hassmaschine

a little bit of both - I doubt I'll ever post on forums regularly, but I have been trying to spend time updating and finishing several things.

I'm having an issue getting rsa delete to flash and winkfp goes unresponsive.. it defaults to 08msv70 and when I change to 12msv80, it gets angry when I plug in a ecu-address value.. also when I download the MsV80 rsa delete, there isn't a Bat file so the only bat is for the msv 328 to 330 flash

rjahl · 04-23-2020, 08:45 PM

Quote:

Originally Posted by hassmaschine

a little bit of both - I doubt I'll ever post on forums regularly, but I have been trying to spend time updating and finishing several things.

Understood, your regular participation has been missed. Try to Pop in and say "hi" every now and then.

I don't do nearly as much with the cars anymore either. Swamped at work and house renovations are killing me.

Skoidat69 · 04-23-2020, 09:19 PM

It came down to time or money and I was tired of F-ing with it so I hired Adrian at SF********* to do it... my issues seem to be my crappy borrowed laptop.. I'm waiting on Adrian's green light to go for a spin

Update: it's a totally different car .. fkn rips

BeatMW_E90 · 04-27-2020, 10:19 AM

hassmaschine seems to be right. I cleared the codes and drove a few hwy trips and the codes haven't come back yet. They showed up within a couple miles of driving after the flash so I kinda had a hunch anyways it was a temp glitch.
Thanks for all the help guys.

As far as everyone posting about this now, we (at least me) have the time now to play with this stuff. Being off work or working from home is boring AF sometimes so why not tackle some of the projects we have been putting off.

wpp1000 · 11-09-2020, 08:17 PM

Trying to flash the 3.0si tune on my e85 z4 3.0i, and when I am doing the RSA delete Winkfp says status: wait for the control file. I've tried every different way of installing and reinstalling all the tools, any help?

e36ti · 11-12-2020, 03:35 PM

Quick question are cvn's resolved now? I looked back at bimmerlabs and it seemed it was being worked on a few months ago

slimmerbimmer · 11-15-2022, 06:02 PM

Quote:

Originally Posted by BeatMW_E90

It's working! Thank you Joe!

What was the fix? I'm having very similar issues to you.

KasperVP · 08-03-2023, 05:21 PM

Hi, new here

Bimmerlabs is down and I’m looking for 3IM tuning software from bimmerlabs to upgrade from 328xi to 330i 3IM tune, really grateful if anyone has a link or files I can download Thanks for your time -Kenny

04-20-2020, 11:47 AM	#23
BeatMW_E90 Enlisted Member 3 Rep 39 Posts Drives: 2007 BMW 328i Join Date: Jun 2019 Location: Ohio iTrader: (0)	I was on a drive and only had my Bluetooth OBD scanner which connects to my phone via the Torque app so I cleared them and I will see if they come back,add then I will read with INPA, Which is not as hard to use as I thought (just a side note) LOL. Loving the Bimmer tools software Last edited by BeatMW_E90; 04-20-2020 at 11:49 AM.. Reason: add info
	Appreciate 0 Quote

04-23-2020, 10:15 AM	#29
hassmaschine Major General 3987 Rep 7,212 Posts Drives: "NBO" 330i Join Date: Jun 2014 Location: earth iTrader: (0)	a little bit of both - I doubt I'll ever post on forums regularly, but I have been trying to spend time updating and finishing several things.
	Appreciate 0 Quote

04-23-2020, 09:19 PM	#32
Skoidat69 Secret Squirrel 287 Rep 393 Posts Drives: 2007 BMW 328ix E91 Join Date: Oct 2019 Location: StL iTrader: (0) Garage List 2007 BMW 328XI [0.00]	It came down to time or money and I was tired of F-ing with it so I hired Adrian at SF********* to do it... my issues seem to be my crappy borrowed laptop.. I'm waiting on Adrian's green light to go for a spin Update: it's a totally different car .. fkn rips __________________ No good sea story starts with Cookies and Milk
	Appreciate 0 Quote

04-27-2020, 10:19 AM	#33
BeatMW_E90 Enlisted Member 3 Rep 39 Posts Drives: 2007 BMW 328i Join Date: Jun 2019 Location: Ohio iTrader: (0)	hassmaschine seems to be right. I cleared the codes and drove a few hwy trips and the codes haven't come back yet. They showed up within a couple miles of driving after the flash so I kinda had a hunch anyways it was a temp glitch. Thanks for all the help guys. As far as everyone posting about this now, we (at least me) have the time now to play with this stuff. Being off work or working from home is boring AF sometimes so why not tackle some of the projects we have been putting off.
	Appreciate 0 Quote

11-09-2020, 08:17 PM	#34
wpp1000 Registered 0 Rep 4 Posts Drives: 2006 BMW z4 3.0i Join Date: Nov 2020 Location: Spartanburg, SC iTrader: (0)	Trying to flash the 3.0si tune on my e85 z4 3.0i, and when I am doing the RSA delete Winkfp says status: wait for the control file. I've tried every different way of installing and reinstalling all the tools, any help?
	Appreciate 0 Quote

11-12-2020, 03:35 PM	#35
e36ti Private 12 Rep 85 Posts Drives: 2006 325i sport Join Date: Apr 2016 Location: United States iTrader: (0)	Quick question are cvn's resolved now? I looked back at bimmerlabs and it seemed it was being worked on a few months ago
	Appreciate 0 Quote

08-03-2023, 05:21 PM	#37
KasperVP Registered 0 Rep 4 Posts Drives: 2008 BMW 328xi Join Date: Aug 2023 Location: Massachusetts iTrader: (0) Garage List 2008 BMW 328xi [8.00]	Hi, new here Bimmerlabs is down and I’m looking for 3IM tuning software from bimmerlabs to upgrade from 328xi to 330i 3IM tune, really grateful if anyone has a link or files I can download Thanks for your time -Kenny
	Appreciate 0 Quote