[Nex_Gen]

Selling a complete set of ISS Forged FS6-R (made in USA) wheels in Graphite Gray w/polished lip. I recently got a new wheel setup. It's simply time to move on from these. Tires are General G-Max 235/35/19 Front ~ Yokohama Advan Fleva 265/30/19 Rear. These tires have only been mounted for ~3K miles and are still practically new. I'm no expert in treadwear but I would stay there is still 90% left on these. They grip well and has been really good with limited slip/tire hop, road noise and comfort in my opinion. It's an all around great daily setup.

Wheels have no bends, cracks or major aesthetic issues. There are light scuffs and marks from age and use as expected. With a good cleaning and polishing, they can still look brand new. I strongly recommend replacing the valve stems/TPMS if intended to use. The current sensors have gone through two owners and are at the end of their life. The two fronts have started to lose air pressure slowly since the new tires were installed. I would chalk that up to valve stem needing to be replaced. I also think getting the tires re-mounted in the process will help as I have a feeling the shop that mounted the current set of tires didn't do the best job sealing the tires (wheels did not lose air with previous tires).

Asking for $1600. No trades. Just looking to get rid of the set all together. No shipping. Pickup only. I can meet up depending on terms of arrangement. Located in Fresno, CA.

Any questions, let me know.

[Nex_Gen]

Bump

[Nex_Gen]

Bump. $1600 takes them.

[Nex_Gen]

Bump. Lowered to $1400 for the fellow BMW enthusiasts

[jhnl50@aol.com]

I'm really interested in these wheels. Can you call me when you get a chance 405-922-4464

[Nex_Gen]

Originally Posted by jhnl50@aol.com

I'm really interested in these wheels. Can you call me when you get a chance 405-922-4464

Sorry. Wheels were sold.