[NoMods]

Decided to get up early and wash my ride before it got really hot in the day, used Gyeon Foam and then Bathe for the contact wash, some iron decon, used my On the Go DI for the final rinse, plus an Ego 765 blower with a MF towel too. I know it's not needed when DI is used but it's my old ways. I had previously coated it already with MOHS Evo and Rims. Finished it off with Polish Angel Primer and Cosmic Spritz ��

[peelerec]

Looking good. What sealant / drying aid are you using for maintenance?

I am currently using Obsessed Garage Drying Aid and is imo one of the best to apply, spread and wipe.

[NoMods]

Originally Posted by peelerec

Looking good. What sealant / drying aid are you using for maintenance?

I am currently using Obsessed Garage Drying Aid and is imo one of the best to apply, spread and wipe.

No drying ad, usually I use ceramic detailer, but this time it's Polish Angel.

I've wanted to try Gyeon Wet Coat, but I already have too much stuff to try out.

[peelerec]

Originally Posted by armoredsaint

No drying ad, usually I use ceramic detailer, but this time it's Polish Angel.

I've wanted to try Gyeon Wet Coat, but I already have too much stuff to try out.

Anything Gyeon is great! Highly recommend.

[Pheonix]

Originally Posted by armoredsaint

No drying ad, usually I use ceramic detailer, but this time it's Polish Angel.

I've wanted to try Gyeon Wet Coat, but I already have too much stuff to try out.

Nice, I also use Polish Angel in top of Kamikaze Ceramic coat. One of my favorite Top coat. Easy to apply and smell delicious. I also use it as Dry aid as well.

[NoMods]

Originally Posted by Pheonix

Nice, I also use Polish Angel in top of Kamikaze Ceramic coat. One of my favorite Top coat. Easy to apply and smell delicious. I also use it as Dry aid as well.

I do notice PA is not as slick as Gyeon Ceramic detailer and the same goes for the PTFE wheel spray, doesn’t repel dust as well from my limited experience vs Gyeon also