[ajgrothn55]

I bought a 5 inch stepped vrsf intercooler, and the screws it came with are phillips head wood screws, are these any good?? I saw that people had some issues with them and got hanger bolts, what size hanger bolts would I need, and where could i get rubber washers??

[oVeRdOsE.]

Originally Posted by ajgrothn55

I bought a 5 inch stepped vrsf intercooler, and the screws it came with are phillips head wood screws, are these any good?? I saw that people had some issues with them and got hanger bolts, what size hanger bolts would I need, and where could i get rubber washers??

wood screw are too small and rust pretty fast. I scraped them.

I simply used a little bigger stainless steel screw. It was a left over from my pool installation, but pretty sure you can find this in most hardware store. The rad support didn't crack.

for rubber. I reused mine, they were in bad shape, but I did some run of electrical tape around them. Those rubber are available in hardware store, if you can't find it, you can use the table chair feet ( stuff to avoid scratching flooring) you have some in the exact shape and rubber. (https://www.amazon.com/X-Protector-S...s%2C407&sr=8-5)