![]() |
![]() |
![]() |
![]() |
![]() ![]() |
![]() |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
DIY Request - diff fluid changing
![]() |
![]() |
08-06-2008, 11:52 AM | #1 |
Private First Class
![]() 18
Rep 104
Posts |
DIY Request - diff fluid changing
I used the DIY by MR. 5 to change my manual tranny fluid yesterday (thanks Mr. 5 eyerything was as you posted) and then went back to change the diff fluid.
This will have to wait until I get a hex large enough for the drain plug, but where do you fill the diff ?? I see the drain plug, but feeling around the top of the diff, I could not find a fill plug. Also, what size hex is needed for the fill plug. Or do you syphon out the fluid and refill using this same fill plug ?? Thanks, in advance Doug |
08-06-2008, 12:11 PM | #2 |
Lieutenant Colonel
![]() ![]() 26
Rep 1,826
Posts
Drives: E92 335i
Join Date: Sep 2006
Location: Lake County, IL
|
There isn't a drain plug, only a fill plug. You need to use an extractor to remove the old fluid. Such is life with "Lifetime Fill" lubricants...
When installing a clutch-type LSD the diff cover is typically replaced with one that has a drain plug. |
Appreciate
0
|
![]() |
Bookmarks |
|
|