Walnut blasting in SE Michigan

Hollandazedd · 06-10-2023, 12:28 PM

Shout out to Curtis! Great guy and really knows his stuff. I drive 3 hours to him, cause I know he really cares about his work. He has done a lot to my X3 including walnut blast, Oil filter housing Gasket, fluid changes and more!
Saved me a lot of $$

Thanks again Curtis!

bthomas325 · 06-10-2023, 11:20 PM

Just had Curt walnut blast the intake valves on my 2012 335is. It was way past due. He sent pictures of before, during, and after. Kept in touch through the whole process. Very professional. Unfortunately, when he returned to his house after test drive the windows would not close. FRM module went out. Looking back, it has been giving me warning signs for a couple months (issues with windows and angel eyes). Long story short, got another one, installed, and coded it and I had it back the next day. Went over and above. Probably couldn’t have happened at a better time. My wife and I are leaving in a week and a half for four days in North Carolina and a BMW meet at the Tail of the Dragon. I can’t imagine that happening while up in the mountains.
Great guy. Noted some other issues I will be taking care of myself, and will probably have to bring it back sooner rather than later to replace the turbos. Of course we’ll have to go bigger! Lol. For now, it’s running better than it has in quite a while. I highly recommend Curt to anyone that needs their intake valves walnut blasted, or pretty much anything else!
Thanks again, Curt.

Oak_Green_Metallic · 01-16-2024, 09:41 PM

Another attestation for the wonderful work Curtis performs. I've taken my e92 335xi to him a number of times throughout the years, but last year was the big one. I had a number of issues including: leaking oil pan gasket, turbos on their way out, blown shocks, bad wheel bearings, and other more minor problems.

Curtis diagnosed and fixed EVERYTHING on the car. While I was at it, decided to upgrade turbos as well as the complimentary plumbing. Over the past year and 11,000+ miles in the car still runs better than it ever has under my ownership. Curtis is truly a magician with this platform, and he is more professional than any shop I have ever worked with. He was always willing to provide advice on how he would personally address the problem and is never looking to overcharge for unnecessary services. I will continue to use Curtis for all my BMW needs.

outriding9800 · 06-10-2024, 04:21 PM

I have been to Curtis 3 times now.. there is a reason why i keep going back..

Great work
Great price

Just got my car back.. (2014 X5)

had the rod bearings replaced.. water pump, shocks / struts, walnut blast. and a few other odds and ends

Keeps me updated on the progress takes pics of everything..

Could not ask for anymore..

Will continue to work with him in the future.

06-10-2023, 12:28 PM	#155
Hollandazedd New Member 3 Rep 17 Posts Drives: 2011 BMW X3 Join Date: Mar 2023 Location: Holland, MI iTrader: (0)	Shout out to Curtis! Great guy and really knows his stuff. I drive 3 hours to him, cause I know he really cares about his work. He has done a lot to my X3 including walnut blast, Oil filter housing Gasket, fluid changes and more! Saved me a lot of $$ Thanks again Curtis!
	Appreciate 0 Quote

06-10-2023, 11:20 PM	#156
bthomas325 New Member 2 Rep 9 Posts Drives: 2012 335is 2004 330Ci Join Date: May 2017 Location: Marshall, MI iTrader: (0)	Just had Curt walnut blast the intake valves on my 2012 335is. It was way past due. He sent pictures of before, during, and after. Kept in touch through the whole process. Very professional. Unfortunately, when he returned to his house after test drive the windows would not close. FRM module went out. Looking back, it has been giving me warning signs for a couple months (issues with windows and angel eyes). Long story short, got another one, installed, and coded it and I had it back the next day. Went over and above. Probably couldn’t have happened at a better time. My wife and I are leaving in a week and a half for four days in North Carolina and a BMW meet at the Tail of the Dragon. I can’t imagine that happening while up in the mountains. Great guy. Noted some other issues I will be taking care of myself, and will probably have to bring it back sooner rather than later to replace the turbos. Of course we’ll have to go bigger! Lol. For now, it’s running better than it has in quite a while. I highly recommend Curt to anyone that needs their intake valves walnut blasted, or pretty much anything else! Thanks again, Curt.
	Appreciate 0 Quote

01-16-2024, 09:41 PM	#157
Oak_Green_Metallic Registered 0 Rep 1 Posts Drives: e92 335xi Join Date: Jan 2024 Location: Detroit iTrader: (0)	Another attestation for the wonderful work Curtis performs. I've taken my e92 335xi to him a number of times throughout the years, but last year was the big one. I had a number of issues including: leaking oil pan gasket, turbos on their way out, blown shocks, bad wheel bearings, and other more minor problems. Curtis diagnosed and fixed EVERYTHING on the car. While I was at it, decided to upgrade turbos as well as the complimentary plumbing. Over the past year and 11,000+ miles in the car still runs better than it ever has under my ownership. Curtis is truly a magician with this platform, and he is more professional than any shop I have ever worked with. He was always willing to provide advice on how he would personally address the problem and is never looking to overcharge for unnecessary services. I will continue to use Curtis for all my BMW needs.
	Appreciate 0 Quote

06-10-2024, 04:21 PM	#158
outriding9800 Private 2 Rep 56 Posts Drives: 06 330i Join Date: Jun 2010 Location: michigan iTrader: (1)	I have been to Curtis 3 times now.. there is a reason why i keep going back.. Great work Great price Just got my car back.. (2014 X5) had the rod bearings replaced.. water pump, shocks / struts, walnut blast. and a few other odds and ends Keeps me updated on the progress takes pics of everything.. Could not ask for anymore.. Will continue to work with him in the future.
	Appreciate 0 Quote