[ait300]

Hey Chaps, i have decided to sell on the 335i and so sticking it here for anyone this may interest ill add the ebay link below for now as loading up pictures is an issue atm

ebay advert link here
https://www.ebay.co.uk/itm/173890248242



BMW 335i
Complete M3 Running Gear

Date Registered - November - 2006

Millage 157,500 miles (252,000 KM)

** 6-Speed Manual Transmission **


2 - Keys
Black Leather Sport Seats
Heated Seats
CCC Navigation System
Xenon Headlights
Full Climate Control
M3 Steering Wheel
M-Sport Leather Gear Knob

Avant Grade M359 19' Wheels
Recent New Tyres Fitted
Recent Geometry Done To M3 GTS Specification
10 Service Visits 7 Of Which Being Main Dealer
BMW Turbos x2 Fitted Within Last 28K Miles
BMW Clutch And Flywheels Fitted Within Last 22K Miles

M3 Brakes
M3 Suspension
M - Limited Slip Differential



* Service History *

24,200 miles Williams Stockport BMW UK – service visit
43,600 miles Bowker Preston BMW UK - service visit
59,100 miles Bowker Preston BMW UK - service visit
88,000 miles Bowker Preston BMW UK - service visit
106,800 miles Bowker Preston BMW UK - service visit
129,000 miles Bowker Preston BMW UK - service visit
133,000 miles Barons Ruislip BMW UK - service visit - 2 New Turbo’s – Inlet Vanos – 2 New Solenoids – All Spark Plugs (Bmw Supplied And Fitted)
135,200 miles Barons Ruislip BMW UK - warranty work - New Clutch and Flywheel (Bmw supplied and fitted)
137,100 miles *** New 6 Injectors index-12 injectors Fitted
145,200 miles - Local Specialist - service visit
152,00 miles - Local Specialist - service visit
157,200 miles - Local Specialist - service visit
157,200 miles ** New Water pump and thermostat



** Engine Modifications
VRSF Down Pipes
JB4 Tune
BMS Duel Intake Cones
BMS Oil Catch Tank
BMS Oil Thermostat (Currently Not Installed)
Clutch Delay Valve Delete

** Chassis Set-up - This car benefits from a complete M3 running gear. while building it (if you want to call it that) we managed to source a low millage donor e92 M3, from which the complete rear subframe and front suspension components were removed and used to enhance the chassis setup on this 335i. As you can appreciate ample research and development has gone into the e92 M3 set-up, chassis setup on the m3 is very unique to it, and nothing like non M cars.
So basically its a complete M3 in terms of its handling and driving characteristics which are fairly impressive. For the rear a complete M3 subframe has been installed which naturally benefits from the M differential plus other M Components.
For the front, everything besides the subframe was used as you can understand the front M3 subframe is unique to the S65 engine and not the N54. So, all attaching m3 parts that can be used were used! i.e arms, knuckle, suspension strut, strut brace, brakes calipers, discs etc.
i also had a short ratio M3 steering rack installed but due to the servotronic not being connected it made the steering heavy at all times which is great for fast/track/nurburgring driving but local parking etc you do eventually feel the heavy steering, hence i removed it.


Following are Genuine BMW M3 parts

Front

Top Strut Brace
Lower Arms
Knuckle
Brake Calipers
Brake Discs - 360mmx30mm
Suspension Strut (with Eibach Springs - Modified top-mounts with E36 Bump-stops)
Anti Roll Bar (much thicker compared 335i setup)


Rear

Subframe - these have different bushes compared to non m cars
M-Differential (Limited Slip Differential)
Suspension Arms
Wheel Hub
Brakes Calipers
Brake Discs - 350mmx24mm
Suspension Strut (with Eibach Springs)
Anti Roll Bar (much thicker compared 335i setup)


- Wheels Tyres
Avant Grade M359 19inch wheels
9J 265/30/19
10J 275/30/19

Some covers and panels have been removed in the engine bay for easy access and cooling purposes, I pretty much have most removed parts available sitting in storage, getting hold of them shouldnt be a problem, also the body work has acquired some blemishes which I’m happy to rectify before collection OR i can incorporate in the price if necessary. pretty sure i’v covered the majority, if there's anything you want to know feel free to contact me.

[Ian UK]

hello, can you tell me where did you get done the custom prop shaft and how much it cost? thank you