[Whiting2000]

So a few weeks ago I took the car to the mechanics to fix my abs pump motor.

It’s been fine since however, today when I accelerated relitivley hard I got lots of engine codes come up as seen below.

I’m not sure if it’s the abs unit, DDE relay or even battery/alternator issue.

Any advice is appreciated cheers.

• 3EFC DDE: Thermal oil-level sensor/oil-condition sensor
• 4560 DDE: Rail-pressure plausibility delivery-controlled
• 3F62 DDE: Roadspeed signal via CAN
• 4992 DDE: Message (instrument cluster, 0x1B4)
• 4C03 Message (cruise control, 0x194) faulty, receiver DDE, transmitter DSC / SZL / LWS / ACC
• 4C23 Message (torque, DSC, 0 xB6) faulty, receiver DDE, transmitter DSC
• 4C13 Message(status DSC,0x19E
• CF34 Message from DSC
• CF32 interface ABS/ASC/DSC: wheel speed
• CF2B No message from longitudinal dynamics management