2008 n52 crank hub

Kye · 07-26-2024, 04:39 PM

Can anyone point me to some good information on replacing just the crank hub?
From what I have been able to find it should be feasible, but everything I've found was on a whole engine rebuild.

I had a belt shred and the engine seems to be fine but front seal still leaks after two new seals installed. The hub looks like it may have gotten gouged by pieces of the belt on the front edges so thinking maybe its damaging the seal just enough on install to make it leak.

Any other thoughts and ideas would welcome as well. Thanks

matteblue3er · 08-05-2024, 02:46 PM

Did you line up the seal and apply Loctite correctly?

07-26-2024, 04:39 PM	#1
Kye Registered 0 Rep 1 Posts Drives: 2008 328xi Join Date: Jun 2024 Location: USA iTrader: (0)	2008 n52 crank hub Can anyone point me to some good information on replacing just the crank hub? From what I have been able to find it should be feasible, but everything I've found was on a whole engine rebuild. I had a belt shred and the engine seems to be fine but front seal still leaks after two new seals installed. The hub looks like it may have gotten gouged by pieces of the belt on the front edges so thinking maybe its damaging the seal just enough on install to make it leak. Any other thoughts and ideas would welcome as well. Thanks
	Appreciate 0 Tweet Quote

08-05-2024, 02:46 PM	#2
matteblue3er Captain 241 Rep 949 Posts Drives: Racecar Join Date: Jul 2015 Location: Philly iTrader: (0)	Did you line up the seal and apply Loctite correctly?
	Appreciate 0 Quote