Sponsored by The Tire Rack

[bimmernick_]

hey guys, i just found a set of my dream wheels (weds kranze cerberus 2s) they are 5x120 18x10+13 im curious if anyone has fit similar specs and if they photos. i believe to run 18x10 the offset should be around 20-25 so im more worried about poke than rubbing

update: i bought them expecting them not to fit. the front kinda fit i guess , about 1/2 of poke super aggressive looking could add camber to fit it. back had about an inch or so of poke. just gonna rebuild the wheels they have a 4 inch lip so ill drop them down to 3 inches possibly 3.5

[whyzee125]

That’s extremely aggressive. You could probably pull it off on the rear of a pre lci but even then you’d need camber, stretch, and rolled fenders.

Front that’s never going to work.

[tcphoto]

They are specs for an M3, put them on a 335xi and they will stick out of the fender more an 1/2", not a good fit or look. You should be looking for ET32-35 for a proper fit.