Instrument cluster swap

LMB335IS · 09-05-2018, 09:00 PM

Quote:

Originally Posted by Rxilher

Quote:

Originally Posted by bmw325i

If anyone needs a cluster coded pm me. I know someone that can do it.

I know this is an old thread. I am interested is someone who can code a new/used E90 cluster. Or help me do it. Trying to help out my bro...his car is 6 speed 335 and he put in a automatic 328 cluster...tamper light is on. I am looking for a used cluster and then hope to code swap back.

A used cluster can't be "coded" per se. It needs to be disassembled, the Eeprom removed and the mileage and VIN erased in a programmer, resoldered, reassembled, and then default coded. This is the only way to get the correct mileage (unless replacement cluster has less miles than car it's going into) and no tamper dot.

Rxilher · 10-17-2018, 09:38 PM

Quote:

Originally Posted by LMB335IS

A used cluster can't be "coded" per se. It needs to be disassembled, the Eeprom removed and the mileage and VIN erased in a programmer, resoldered, reassembled, and then default coded. This is the only way to get the correct mileage (unless replacement cluster has less miles than car it's going into) and no tamper dot.

Oh wow. OK. thanks. I have been doing A LOT of reading/searching. In my case my brother out in a higher milage cluster. It seems that if that happens all computers take on the higher milage ? Is that true? Is there anyway to find out the actual now and code/program correctly?

jackzai · 09-28-2019, 09:11 AM

I have an cluster 335i but when i installed in my 320i. It showed the tyre indicator error and it's dont have the Key setting in BC. Anyone know why?

OldIrishE90 · 10-18-2019, 03:59 PM

I bought a 2nd hand cluster for my 320d. Although it has transpired that it came from and automatic and mine is manual so it’s showing a transmission fault even though it’s not an automatic. When I get this codes with my vin will the cluster know that my car is manual and stop with the warning light? Thanks in advance

ctuna · 10-19-2019, 03:00 AM

should be easy to program it from auto to manual or vice a
versa see the coding board. If you haven't virginized the module
you may have a big problem with the tamper dot .
This is a coding subforum question.

https://www.e90post.com/forums/showthread.php?t=1563274

Fiji1k · 08-25-2024, 05:36 AM

[QUOTE=onebadmofo;13546411]

Quote:

Originally Posted by cuco

It stays there. When cold it's at ~4500 and then as the car warms up gradually moves to 7000.

Not sure if youre still active here but how did you code them? I want a m3 cluster but if it requires them being coded Id like to know how

ctuna · 08-25-2024, 11:25 AM

Go to the coding sub forum here.

09-28-2019, 09:11 AM	#47
jackzai New Member 1 Rep 7 Posts Drives: e90 Join Date: Mar 2015 Location: Malaysia iTrader: (0)	I have an cluster 335i but when i installed in my 320i. It showed the tyre indicator error and it's dont have the Key setting in BC. Anyone know why?
	Appreciate 0 Quote

10-18-2019, 03:59 PM	#48
OldIrishE90 New Member 0 Rep 5 Posts Drives: Bmw e90 320d Join Date: Oct 2019 Location: Northern Ireland iTrader: (0)	I bought a 2nd hand cluster for my 320d. Although it has transpired that it came from and automatic and mine is manual so it’s showing a transmission fault even though it’s not an automatic. When I get this codes with my vin will the cluster know that my car is manual and stop with the warning light? Thanks in advance
	Appreciate 0 Quote

10-19-2019, 03:00 AM	#49
ctuna Lieutenant General 2033 Rep 13,347 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	should be easy to program it from auto to manual or vice a versa see the coding board. If you haven't virginized the module you may have a big problem with the tamper dot . This is a coding subforum question. https://www.e90post.com/forums/showthread.php?t=1563274 Last edited by ctuna; 10-19-2019 at 03:06 AM..
	Appreciate 0 Quote

08-25-2024, 11:25 AM	#51
ctuna Lieutenant General 2033 Rep 13,347 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	Go to the coding sub forum here.
	Appreciate 0 Quote