[Kian55]

Hi
I just tried to start my car it started then it cut off with the error message that there is low engine oil pressure and there may be engine damage, I then tried again and the same thing happened but on the third try it started and didn’t cut out at all.
Could anyone be able to explain what’s going on please.
Car: BMW 3 series 2010 2L diesel E90

[Brandoch]

Originally Posted by Kian55

Hi
I just tried to start my car it started then it cut off with the error message that there is low engine oil pressure and there may be engine damage, I then tried again and the same thing happened but on the third try it started and didn’t cut out at all.
Could anyone be able to explain what’s going on please.
Car: BMW 3 series 2010 2L diesel E90

Scan for codes. And don't start the car again until you figure it out. If it really has no oil px you could destroy the engine.

[Kian55]

I’ve scanned for codes and nothing showed up and the car has ran perfectly since

[Brandoch]

Originally Posted by Kian55

I’ve scanned for codes and nothing showed up and the car has ran perfectly since

Did you use a code reader that can read BMW specific codes? A generic code reader won't read every code.

[Kian55]

Yh I used a Carly bmw but I havnt had any issues since this happend the car has started and ran fine and I think it’s running a little better