E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > [DIY] Electric Power Steering Conversion



Reply
 
Thread Tools Search this Thread
      05-27-2024, 04:01 AM   #45
anjo
Registered
0
Rep
4
Posts

Drives: e92 335i
Join Date: May 2024
Location: netherlands

iTrader: (0)

The steering is light without coding and I’ve used my own tensioner but i have used the belt that you linked!
Appreciate 0
      05-27-2024, 04:04 AM   #46
anjo
Registered
0
Rep
4
Posts

Drives: e92 335i
Join Date: May 2024
Location: netherlands

iTrader: (0)

And i had to remove 1 pulley from the middle the tensioner is the same as you listed but a different part number but it is exactly the same
Appreciate 0
      05-29-2024, 04:43 AM   #47
arees
Registered
0
Rep
3
Posts

Drives: e92 N54
Join Date: May 2024
Location: EU

iTrader: (0)

This is awesome!
Definitely motivates me to do the conversion on my n54. Do you have any steering related lights on the dash?
If everything works, then what benefit is there to do the coding part…
Appreciate 0
      05-29-2024, 11:11 AM   #48
kolopn
Private
38
Rep
80
Posts

Drives: E92 325i N52B25
Join Date: May 2023
Location: Poland

iTrader: (0)

You'll have same VIN as your car, and also without adding 1CB there potentially could be problems when some error occurs - you have additional light on dash that will light up when error show. So coding is more for integration of EPS into the car, but also for changing characteristics of that
Appreciate 0
      06-20-2024, 11:44 PM   #49
330ci
New Member
0
Rep
10
Posts

Drives: 2017 BMW M240i (F22 LCI)
Join Date: Aug 2022
Location: Australia

iTrader: (0)

Hey great write up. I tried tackling this myself and wired the rack to the car temporarily (while it was still off the car).

I can’t connect to the EPS module. It’s not showing up on INPA. Tool32 won’t connect either.

I’ve coded FA on NCSExpert - #0910, $1CB, $216 to CAS and FRM. But EPS isn’t listed as a module on NCSExpert.

I’ve got a 2006 E90 335i with N54 and these never were released with EPS. I thought that I should still be able to connect to the module using INPA or Tool32.

Any thoughts or do you think it won’t work because it was never released for the particular model?
Appreciate 0
      06-21-2024, 12:38 AM   #50
kolopn
Private
38
Rep
80
Posts

Drives: E92 325i N52B25
Join Date: May 2023
Location: Poland

iTrader: (0)

Check if the CAN loom is wired properly. When connected it should be showing up automatically. Electronics in E9X almost stayed same from 2004, so this is not a case. Maybe there is a problem with mismatch pins in the EPS socket? I can paste the wiring pinout if you want.
Appreciate 0
      07-01-2024, 12:40 AM   #51
panky
panky
2
Rep
11
Posts

Drives: bmw e90
Join Date: Jan 2023
Location: melbourne

iTrader: (0)

accessory belt

Quote:
Originally Posted by kolopn View Post
Glad to hear that I inspired somebody!
To be honest, there is no difference in throttle response, biggest differences for me are ease of parking, and a little bit reduced fuel consumption. I have driven with EPS thousands of km (mls ) and I see no disadvantage of this system. Feeling of the steering is basically very similar even when pushing through mountain roads.

New belt I took from LCI E92 325i. I have pre-LCI, and EPS was not available there, but as far as I remember it was available on E90 pre-LCI. So full OEM+ mod

hi
just wondering if you would have the part number for the new accessory belt you used

cheers
Appreciate 0
      07-01-2024, 07:55 AM   #52
kolopn
Private
38
Rep
80
Posts

Drives: E92 325i N52B25
Join Date: May 2023
Location: Poland

iTrader: (0)

It's 11 28 7628651 - 6PK1827 for N52.
Appreciate 0
      07-15-2024, 01:21 PM   #53
BuTzufo
Registered
0
Rep
2
Posts

Drives: E92 n54
Join Date: Jul 2024
Location: Uk

iTrader: (0)

Hello amazing thread, im attempting to do this on my e92 335i n54, removed eps from e92 320i i see you sayin there are only 3 wires to connect in the ecu box, my eps harness has 5 wires do you have any idea what to connect where?
Attached Images
 
Appreciate 0
      07-16-2024, 12:31 PM   #54
MrDarkArtz
New Member
0
Rep
13
Posts

Drives: 325i
Join Date: Dec 2018
Location: Durham

iTrader: (0)

Quote:
Originally Posted by BuTzufo View Post
Hello amazing thread, im attempting to do this on my e92 335i n54, removed eps from e92 320i i see you sayin there are only 3 wires to connect in the ecu box, my eps harness has 5 wires do you have any idea what to connect where?
Have you got a pic of the plug side? Weird because the 2 twisted pairs are the same... PT-CAN lol
Appreciate 0
      07-16-2024, 02:50 PM   #55
kolopn
Private
38
Rep
80
Posts

Drives: E92 325i N52B25
Join Date: May 2023
Location: Poland

iTrader: (0)

As I see in ISTA wiring diagram in EPS socket PIN 1 is CAN (Wake Up line), PIN 5 (PT CAN High (PT - Powertrain)), PIN 2 PT CAN Low. I have checked pre LCI, and LCI and all diagrams are the same, so I do not know why there are two PT Cans in one socket.
Appreciate 0
      07-16-2024, 03:50 PM   #56
BuTzufo
Registered
0
Rep
2
Posts

Drives: E92 n54
Join Date: Jul 2024
Location: Uk

iTrader: (0)

Steering angle sensor?
Appreciate 0
      07-16-2024, 06:16 PM   #57
kolopn
Private
38
Rep
80
Posts

Drives: E92 325i N52B25
Join Date: May 2023
Location: Poland

iTrader: (0)

Nope, I'm talking about the socket that is coming from the "outside". Steering angle sensor is connected directly between sensor and EPS module on the rack itself. Socket that has to be done by Yourself has to have those 3 wires (wake up line, and 2 pt cans). You can connect that into DME Box. (This socket has 6 pins, but 3 are used and required as I mentioned earlier).
Appreciate 0
      09-11-2024, 06:44 AM   #58
panky
panky
2
Rep
11
Posts

Drives: bmw e90
Join Date: Jan 2023
Location: melbourne

iTrader: (0)

Quote:
Originally Posted by kolopn View Post
Nope, I'm talking about the socket that is coming from the "outside". Steering angle sensor is connected directly between sensor and EPS module on the rack itself. Socket that has to be done by Yourself has to have those 3 wires (wake up line, and 2 pt cans). You can connect that into DME Box. (This socket has 6 pins, but 3 are used and required as I mentioned earlier).
hi

did you find the solution to your problem? i am in the same boat. did lot of research on wiring diagram. on e90 to torque sensor , the diagram says 4 pins, but i have only two wires in pin 2 and pin 5 positon. it is really weird because all the diagrams from on 3 E series, say 4 pins and I have only two. rest of the pins from the other connectors match. 2 pin torque sensor was only used on some F SEIRES car. I am lost. do you mind if you can check how many pins do you have on torue sensor plug. this plug is on EPS and connects to the sensor on steering rack shaft.
Appreciate 0
      09-11-2024, 11:10 AM   #59
kolopn
Private
38
Rep
80
Posts

Drives: E92 325i N52B25
Join Date: May 2023
Location: Poland

iTrader: (0)

You are talking about cable that is running from torque sensor to EPS module inside electric motor, or about body wiring that connect to eps?
Appreciate 0
      09-11-2024, 06:35 PM   #60
panky
panky
2
Rep
11
Posts

Drives: bmw e90
Join Date: Jan 2023
Location: melbourne

iTrader: (0)

Quote:
Originally Posted by kolopn View Post
You are talking about cable that is running from torque sensor to EPS module inside electric motor, or about body wiring that connect to eps?
I am talking about wiring from torque sensor to EPS MODULE. i checked the wiring their and I found only two wires, coming from torque sensor to EPS MODULE. I checked the voltage of the 100amp wire with a test light under load and it is workigg. I also checked voltage on PT-can wire and voltage is also their obviously not 12 volts there. I also checked some other wiring diagrams on e series and some 100amp wire use capacitor in parallel. not sure what is that for. could you check the wire coming from torque sensor to EPS MODULE? not sure what I am doing wrong or EPS MOTOR IS being smart and faulty for me
Appreciate 0
      09-29-2024, 04:01 PM   #61
kolopn
Private
38
Rep
80
Posts

Drives: E92 325i N52B25
Join Date: May 2023
Location: Poland

iTrader: (0)

I've checked my EPS rack that is laying in my garage, and from torque sensor to module I have 4 wires, White, yellow, brown and green. I will check in ISTA if there is anything more about that. If you want I can send picture of that plug.
Appreciate 0
      09-29-2024, 04:27 PM   #62
kolopn
Private
38
Rep
80
Posts

Drives: E92 325i N52B25
Join Date: May 2023
Location: Poland

iTrader: (0)

Alright so basically from Torque sensor you have 4 wires:
PIN 1 - Green - 5V
PIN 2 - Brown - Ground
PIN 3 - White - Signal Sine
PIN 4 - Yellow - Signal Cosine
Appreciate 0
      10-06-2024, 01:24 PM   #63
OiramAvlis
New Member
5
Rep
11
Posts

Drives: BMW E91
Join Date: Oct 2024
Location: Warwick

iTrader: (0)

Hey, thanks for useful guide, got my answers ahah my friend wasn't sure if he should do it or not
Appreciate 0
      10-08-2024, 11:00 PM   #64
panky
panky
2
Rep
11
Posts

Drives: bmw e90
Join Date: Jan 2023
Location: melbourne

iTrader: (0)

got it done

Quote:
Originally Posted by kolopn View Post
Alright so basically from Torque sensor you have 4 wires:
PIN 1 - Green - 5V
PIN 2 - Brown - Ground
PIN 3 - White - Signal Sine
PIN 4 - Yellow - Signal Cosine
Hi mate
thanks for replying. I got my thing sorted. EPS wiring can differ so much from car to car. I have only two wires connecting EPS torque sensor to EPS RACK plug. so different from yours. But it is very much doable with little patience and knowledge of electronics of car. I got stuck on my splice connector. I was able to check voltage and resistance at my wire splice connectors AND everything seemed to be good, but still not showing on INPA.I was frustrated and stuck. decided to go again and swap canbus wires and BANG I had EPS showing on INPA. so I wiggled the wires and it was on and off on INPA, so I knew that wires are loose though i was measuring continuity. so lesson learnt. check your splices or wire joints triple when you doing this retrofit. I am happy with this. saves lot of space in engine compartment. next retrofit would be air bag suspension
BUT THANKS FOR SHARING THIS RETROFIT
Appreciate 1
kolopn37.50
      10-09-2024, 02:35 AM   #65
kolopn
Private
38
Rep
80
Posts

Drives: E92 325i N52B25
Join Date: May 2023
Location: Poland

iTrader: (0)

Glad to hear that you have sorted out everything! We all here to help each other, so thank you for your kind words! Enjoy EPS!
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:40 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST