335i brakes on 328i

feuer · 10-27-2017, 11:20 AM

Quote:

Originally Posted by Patrickkim1

About to do this mod on my e92 328i. With this mod does it improve braking or is it just cosmetic? Also, just to make sure I just need stock rotors,calipers (do I need to buy 335i caliper bracket or can I use my 328i) and pads to complete this? Please lmk

Buy these from Lamumba instead http://www.e90post.com/forums/showthread.php?t=1426009

david in germany · 10-27-2017, 12:54 PM

Quote:

Originally Posted by Patrickkim1

About to do this mod on my e92 328i. With this mod does it improve braking or is it just cosmetic? Also, just to make sure I just need stock rotors,calipers (do I need to buy 335i caliper bracket or can I use my 328i) and pads to complete this? Please lmk

Vast improvement over stock. You do need the 335i bracket, caliper rotors, trim the rear shield. The original lines will work as well. You will most likely need coding tough.

Yassssm4 · 10-31-2017, 01:28 AM

Hey david, You need to code to get the brakes to work?

david in germany · 10-31-2017, 11:02 AM

Quote:

Originally Posted by Patrickkim1

Hey david, You need to code to get the brakes to work?

Yes, some people say that you don't need to but in my expirences, you do.

The Nightman · 10-31-2017, 12:56 PM

Has anyone done the 335i fronts only? I'm curious how pedal feel, brake bias, etc are changed.

david in germany · 10-31-2017, 01:33 PM

Quote:

Originally Posted by freedomfries

Has anyone done the 335i fronts only? I'm curious how pedal feel, brake bias, etc are changed.

335i rears will not bolt directly to the 328i so fronts are normally the only ones done.
Without coding the bias is messed up and pedal is soft. With coding the 328 will out brake a 335i every time and has a solid confidant feel.

david in germany · 10-31-2017, 01:35 PM

You guys can check out the retrofit coding discussion in this thread below.
http://www.e90post.com/forums/showthread.php?t=1317220

putnampunk · 07-14-2018, 03:28 PM

Quote:

Originally Posted by VTECaddict

This is only a problem with RWD E90 325i/328i and RWD E92 328i. The 330i, E91, E93, and all AWD models all use the larger rear parking brake, so you can direct swap the 335i rear brakes on those cars and still have functional parking brakes without modification.

So for an E91 - just need the calipers and carriers (plus pads of course)?

feuer · 07-14-2018, 06:38 PM

Quote:

Originally Posted by rwh11385

So for an E91 - just need the calipers and carriers (plus pads of course)?

Plus rotors of course

putnampunk · 07-14-2018, 07:36 PM

Quote:

Originally Posted by feuer

Plus rotors of course

Haha, true. Anything to be mindful of on brake line length? I'm due for new ones and could order either spec.

feuer · 07-14-2018, 09:01 PM

Quote:

Originally Posted by rwh11385

Haha, true. Anything to be mindful of on brake line length? I'm due for new ones and could order either spec.

They are all interchangeable.

Kyle264E90 · 02-25-2022, 02:39 PM

So will 335i brakes fit on my 2011 e90 328i X-drive? Including the rears since it is an X-drive? Is this including the pads, rotors, and the sensors? Not the calipers

I have an opportunity to buy a 335i Zimmerman break kit with everything included. (Rotors, pads, sensors) Will this fit?

eljay · 02-25-2022, 09:05 PM

Quote:

Originally Posted by Kyle264E90

So will 335i brakes fit on my 2011 e90 328i X-drive? Including the rears since it is an X-drive? Is this including the pads, rotors, and the sensors? Not the calipers

I have an opportunity to buy a 335i Zimmerman break kit with everything included. (Rotors, pads, sensors) Will this fit?

Yes.

EDIT:
I just realized that you specifically said everything except the calipers. This discussion is about a complete brake fitment, so especially, calipers.
You need 335i calipers and brackets to fit the larger rotors and pads.

P.S. It's a brake kit. When brakes break, you have a problem and need a break.

feuer · 02-25-2022, 10:00 PM

Quote:

Originally Posted by Kyle264E90

So will 335i brakes fit on my 2011 e90 328i X-drive? Including the rears since it is an X-drive? Is this including the pads, rotors, and the sensors? Not the calipers

I have an opportunity to buy a 335i Zimmerman break kit with everything included. (Rotors, pads, sensors) Will this fit?

If parking brake us 185mm yes. I’m not sure all e90 xdrive do. It’s been a while. I think for e91 xdrive yes. Just check in realoem with your vin.

3DIRTY8 · 03-08-2022, 11:13 AM

Whoops 😅 I forgot to code my 335 fronts when I did the swap. Gonna have to look into doing this

edycol · 03-13-2022, 06:14 PM

Quote:

Originally Posted by feuer

Quote:

Originally Posted by Kyle264E90

So will 335i brakes fit on my 2011 e90 328i X-drive? Including the rears since it is an X-drive? Is this including the pads, rotors, and the sensors? Not the calipers

I have an opportunity to buy a 335i Zimmerman break kit with everything included. (Rotors, pads, sensors) Will this fit?

If parking brake us 185mm yes. I’m not sure all e90 xdrive do. It’s been a while. I think for e91 xdrive yes. Just check in realoem with your vin.

XDrive is 185mm.

augustus maximus · 02-06-2024, 05:36 PM

My 06 330Xi boasts the same size rotors as the 335i. I'm converting my 07 328Xi to full 335i calipers and rotors, front and rear. It's all plug and play. Everything bolts up and no hand brake problems.

Tescot808 · 02-28-2024, 12:48 AM

I have a 2011 US version E91 328i (not xi). Just checked realoem and saw my rear parking brake is in fact 185mm

Have another question about doing this mod... Does the master cylinder need to be upgraded? Are they the same on the 335, is there enough fluid, do the calipers use the same size fluid housing?

Onizukachan · 03-06-2024, 03:20 PM

As per the diy and faq on this website about this, same master. Direct swap.

youRA · 09-12-2024, 05:32 PM

Guys, I followed this thread, but the 335i calipers don't fit my 328i E93. The mounting openings have a different width. Any advice is appreciated.

Can't see how to add a picture, but here is the link:

https://drive.google.com/file/d/1S3P...w?usp=drivesdk

Brian_ · 09-12-2024, 10:35 PM

You sure that's an e9x 335i caliper and caliper carrier? Where did you source them from?

lordnikon · 10-08-2024, 03:56 PM

Looks good

10-31-2017, 01:28 AM	#25
Yassssm4 Private First Class 13 Rep 110 Posts Drives: bmw Join Date: May 2017 Location: Seattle Washington iTrader: (0)	Hey david, You need to code to get the brakes to work?
	Appreciate 0 Quote

10-31-2017, 12:56 PM	#27
The Nightman Cometh 1235 Rep 1,405 Posts Drives: Boy's Soul Join Date: Jul 2016 Location: Boy's Hole iTrader: (4) Garage List E90 LCI "330i& ... [10.00]	Has anyone done the 335i fronts only? I'm curious how pedal feel, brake bias, etc are changed.
	Appreciate 0 Quote

10-31-2017, 01:35 PM	#29
david in germany Lieutenant Colonel 732 Rep 1,819 Posts Drives: 118i, 335i and 328i Join Date: Nov 2011 Location: Mannheim Germany iTrader: (2)	You guys can check out the retrofit coding discussion in this thread below. http://www.e90post.com/forums/showthread.php?t=1317220 __________________ 2009 118i Monaco Blue "Maximillion" 2009 335i Saphire Black M Sport "Leopold" Cobb stage 2 aggressive tune, Mishimoto FMIC, Cobb charge pipe, Cobb catted down pipes, Forge diverter valves, BMS inlets and DCI, Cyba scoops and M Individual Audio retrofit and M3 gauge cluster retrofit. 2011 328i Titan Silver M Sport "Franzel" <--Wife's car
	Appreciate 0 Quote

02-25-2022, 02:39 PM	#34
Kyle264E90 New Member 10 Rep 25 Posts Drives: 2011 BMW 328i E90 Join Date: Dec 2020 Location: Massachusetts iTrader: (0)	So will 335i brakes fit on my 2011 e90 328i X-drive? Including the rears since it is an X-drive? Is this including the pads, rotors, and the sensors? Not the calipers I have an opportunity to buy a 335i Zimmerman break kit with everything included. (Rotors, pads, sensors) Will this fit?
	Appreciate 0 Quote

03-08-2022, 11:13 AM	#37
3DIRTY8 New Member 9 Rep 26 Posts Drives: E90 LCI Join Date: Feb 2017 Location: San Diego iTrader: (0)	Whoops 😅 I forgot to code my 335 fronts when I did the swap. Gonna have to look into doing this
	Appreciate 0 Quote

02-06-2024, 05:36 PM	#39
augustus maximus New Member 6 Rep 8 Posts Drives: e90 06 330XI, e92 07 328XI Join Date: Nov 2023 Location: Connecticut iTrader: (0)	My 06 330Xi boasts the same size rotors as the 335i. I'm converting my 07 328Xi to full 335i calipers and rotors, front and rear. It's all plug and play. Everything bolts up and no hand brake problems. Last edited by augustus maximus; 02-06-2024 at 06:59 PM..
	Appreciate 0 Quote

02-28-2024, 12:48 AM	#40
Tescot808 New Member 0 Rep 7 Posts Drives: 2011 BMW 328i Touring Join Date: Sep 2021 Location: Honolulu, HI iTrader: (0)	2011 E91 to 335 Brake swap - Reservoir -Master Cylinder I have a 2011 US version E91 328i (not xi). Just checked realoem and saw my rear parking brake is in fact 185mm Have another question about doing this mod... Does the master cylinder need to be upgraded? Are they the same on the 335, is there enough fluid, do the calipers use the same size fluid housing? Last edited by Tescot808; 02-28-2024 at 01:06 AM.. Reason: more info
	Appreciate 0 Quote

03-06-2024, 03:20 PM	#41
Onizukachan Great Teacher 1546 Rep 1,467 Posts Drives: 06 e91 325ix Join Date: Aug 2015 Location: El Paso iTrader: (0) Garage List 2006 E91 325ix [10.00] 2006 Mini r53 JCW [0.00] 2005 Mini r53 [0.00]	As per the diy and faq on this website about this, same master. Direct swap. __________________ ‘06 e91 manual 325ix BarriqueRot over Terra (one of 1), Nav, Sport, L7 A few OEM+ mods: MTech front bumper, MSport wheel & handbrake, 4AD trim, full rear shades, more to come…
	Appreciate 0 Quote

09-12-2024, 05:32 PM	#42
youRA Registered 0 Rep 4 Posts Drives: E93 328i Join Date: Jan 2024 Location: California iTrader: (0)	Guys, I followed this thread, but the 335i calipers don't fit my 328i E93. The mounting openings have a different width. Any advice is appreciated. Can't see how to add a picture, but here is the link: https://drive.google.com/file/d/1S3P...w?usp=drivesdk
	Appreciate 0 Quote

09-12-2024, 10:35 PM	#43
Brian_ Enlisted Member 21 Rep 33 Posts Drives: '11 128i, '18 VW Golf Join Date: Jun 2023 Location: TX iTrader: (1) Garage List 2011 BMW 128i [0.00]	You sure that's an e9x 335i caliper and caliper carrier? Where did you source them from?
	Appreciate 1 mattanderson278.00 Quote

10-08-2024, 03:56 PM	#44
lordnikon Captain 524 Rep 621 Posts Drives: Break My Wallet Join Date: Feb 2023 Location: Ontario iTrader: (0) Garage List 2011 BMW 328i xDrive [0.00]	Looks good
	Appreciate 0 Quote