[zero2sixtyZ]

Originally Posted by RaFFI ///M3

Anyone know where I can find this spoiler? I've seen two sellers on ebay that have them but one is in UK and the other in Latvia

https://www.ebay.com/itm/276536225255

Looking for the ABS version as I'm going to paint match.

Wish I could help. The sellers I used are no longer around, and I can't find another one.

[tcphoto]

I took advantage of beautiful day.

[minulache]

ST X coilovers and 10mm F- 12mm B spacers

View post on imgur.com

[E92_35IS]

2011 335is all info here https://www.bimmerpost.com/forums/sh...php?p=31418142

[thormessiah]

One of my favorite pics. On my old wheels

[Thor330]

Built in 2006.

[Shoooter_j]

Gorgeous day out:

[Kevin_The_Clean1]

Originally Posted by Shoooter_j

Gorgeous day out:

The more you post those nice BBS wheels the more I want to order a set from the TireRack.

[peters]

😮‍💨

[Kevin_The_Clean1]

Originally Posted by Shoooter_j

Gorgeous day out:

Did you go with 18" or 19" BBW wheels... ?

[Shoooter_j]

Originally Posted by Kevin_The_Clean1

Did you go with 18" or 19" BBW wheels... ?

19x8.5 +32 front w/ 245/35/19 PS4S
19x9.5 +35 rear w/ 275/30/19 PS4S

Ready to finally place your order? 🙂

[Kevin_The_Clean1]

Originally Posted by Shoooter_j

19x8.5 +32 front w/ 245/35/19 PS4S
19x9.5 +35 rear w/ 275/30/19 PS4S

Ready to finally place your order? 🙂

I wish man. Every time I look up these exact same color, size & style BBS on TireRack, they happen to be out of stock. Guess it's a blessing though as I need to replace my oil pan gasket, which means a **it of money in labor. In the near future though I hope.

[zero2sixtyZ]

Just picked up from my friend's body shop... new OEM M-Sport bumper, and fog housings after a road debris incident.

[RealJ22]

First time the two met. Horrible photo.

Also had to take over my girlfriends garage too haha.



best image hosting

[Socket]

Originally Posted by RealJ22

First time the two met. Horrible photo.

Also had to take over my girlfriends garage too haha.



best image hosting

Nice pair of bimmers

[Socket]

[F806speed]

[RealJ22]

I've always liked those BBS. Considering a set for the daily if I can source them cheap.

But I also kinda want to do square setup so I can rotate.

[AlexKoast]

Just posted this in the dyno thread but i'll share it here too:

Took my car to the Dyno on Saturday

433 wheel horsepower which is somewhere between 480 to 509 depending on who you ask

Full mod list for those curious:

- RB Two's upgraded 15T Turbos
- Custom tune for 18 PSI on pump gas
- VRSF Relocated Inlets
- ARM 2 inch outlets
- VRSF 7 inch intercooler
- VRSF Charge pipe with Tial BOV and larger diameter lines
- Index 12 Injectors
- PR Walbro 450 Fuel Pump
- EKP3 module with active cooling from Arc terminator
- Upgraded MOSFETS in the DME ��
- Turner relocated aluminum expansion tank
- relocated vacuum cannisters
- 335is clutch
- Dual Sheer Selector Rod (although switching to RTD is tempting)
- VRSF Downpipes
- PE Mod
- 335is Clutch
- Bilstein B14 Coilovers
- M3 control arms (front)
- Dinan Camber Plates
- F30 M Sport Front brakes
- 135i Brembo rear brakes
- SS Brake Lines
- 18x9.5 Square Style 260m wheels
- 235/40/18 Front, 265/35/18 Rear
- M3 style Front bumper with custom splitters by yours truly
- M Sport Rear bumper custom vented by yours truly

[eastsidaz]

Originally Posted by AlexKoast

Just posted this in the dyno thread but i'll share it here too:

Took my car to the Dyno on Saturday

433 wheel horsepower which is somewhere between 480 to 509 depending on who you ask

Full mod list for those curious:

- RB Two's upgraded 15T Turbos
- Custom tune for 18 PSI on pump gas
- VRSF Relocated Inlets
- ARM 2 inch outlets
- VRSF 7 inch intercooler
- VRSF Charge pipe with Tial BOV and larger diameter lines
- Index 12 Injectors
- PR Walbro 450 Fuel Pump
- EKP3 module with active cooling from Arc terminator
- Upgraded MOSFETS in the DME ��
- Turner relocated aluminum expansion tank
- relocated vacuum cannisters
- 335is clutch
- Dual Sheer Selector Rod (although switching to RTD is tempting)
- VRSF Downpipes
- PE Mod
- 335is Clutch
- Bilstein B14 Coilovers
- M3 control arms (front)
- Dinan Camber Plates
- F30 M Sport Front brakes
- 135i Brembo rear brakes
- SS Brake Lines
- 18x9.5 Square Style 260m wheels
- 235/40/18 Front, 265/35/18 Rear
- M3 style Front bumper with custom splitters by yours truly
- M Sport Rear bumper custom vented by yours truly

Good stuff! Thanks for sharing.

[cmbe92guy]

Loving the way 640m’s look on the titanium silver metallic

[E92_35IS]

Originally Posted by Shoooter_j

19x8.5 +32 front w/ 245/35/19 PS4S
19x9.5 +35 rear w/ 275/30/19 PS4S

Ready to finally place your order? 🙂

I plan to run almost that exact set up only I was thinking about the 9.5 rears with a +22 would work better/needed. Do you have spacers on the rear?? I didn't think the 275 tires would fit with a +35 9.5??¿