|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Upgraded LPFP or HPFP needed for FBO (full bolt ons) and stage 2/2+ tune?
|
|
09-22-2024, 12:14 AM | #1 |
Registered
0
Rep 2
Posts |
Upgraded LPFP or HPFP needed for FBO (full bolt ons) and stage 2/2+ tune?
Title, also new to modding
If an upgraded LPFP is needed, should i go bucket or bucketless and what are the pros and cons? i'm not sure about anything with HPFP so any info is great help, thanks. '11 e93 335is |
09-25-2024, 09:17 PM | #2 |
New Member
2
Rep 7
Posts |
Get a 535lph pump bucketed and youll be good for simple bolt ons. Only differences w/ a bucketless system is you shouldnt let your gas level get low nor should track the car since there isnt a bucket to siphon fuel from at low levels.
|
Appreciate
1
SlowE92119.00 |
10-01-2024, 01:08 PM | #3 |
Lieutenant Colonel
997
Rep 1,516
Posts |
To answer your question, upgraded LPFP is ONLY needed in 2 cases:
1. The factory fuel pump is not able to keep up with the fueling requirements of your tune, always log a few runs in 3rd (or 4th if you have a crazy long runway i guess) to ensure low pressure fuel pressure remains above 60PSI, anything below 60 PSI requires an upgrade. 2. You run an E85mix tune above E30. This also has the same caveat of ensuring your pressures remain above 60PSI at all times. Also keep in mind that most people don't take into account that an upgraded LPFP will REQUIRE that your EKPM be actively cooled. This is something people don't point out often and will cause all kinds of issues, even on brand new EKPM modules. New HPFPs are needed when rail pressures drop below 1800-2000PSI under load. I think people that run full E85 tunes sometimes install overdrive kits on their HPFP, but I have seen failures and design issues with those. For the rest of us as long as your HPFP is healthy then no need to upgrade. I have run E60 on the stock HPFP with no issues. |
Appreciate
0
|
Bookmarks |
|
|