DIY: Install SSD in CIC

thecarfixer · 02-28-2024, 06:05 PM

I tried to do this with HDD Raw Copy, on a SanDisk Extreme Pro 128Gb 160MB/s UDMA7 (black) CF card, in the Syba CF caddy.

No joy, Nav won't start "Function not available".

Is it my CF card that causes the problem?

POBEP · 02-28-2024, 06:33 PM

check (change) master/slave switch on a the Syba CF adapter

thecarfixer · 02-29-2024, 02:30 AM

The CF card is in the slave side, as everyone else has done..

BenGreenPlant · 05-07-2024, 09:45 PM

I have a similar problem to some where I've followed the instructions but navigation and media are unavailable.

After mounting partitions on the Syba /CF in QNX I've found the .boot folder to be missing from the CDDB folder. CIC detects the Syba / CF but after trying to load for a while it just gives up, greys out navigation and media is left in a permanent state of limbo searching for files.

I have tried using sudo DD command in ubuntu and also HDD RAW program in Windows 11 to make an image of the original drive which has been put on the Syba / CF to no avail.

I'm going to try clonezilla and see if anything changes.
thanks for all the help everyone.

UPDATE: I'm a tard and the .boot folders were hidden in QNX file manager.
MD5 of clonezilla, linux DD & HDD RAW all have the same MD5 so that's good I guess.

I have a feeling the poor quality of the SYBA adapter is at fault here. The pins are too short, the pcb is wonky & the CIC HDD cover wont go all the way in easily when installed etc. Will update when the new one arrives from china.

Raghza · 05-08-2024, 06:01 AM

So what's the verdict - if I don't use CIC navigation and don't store music on its hard drive, does swapping the original HDD with an SSD result in some notable improvements like a lot quicker and more responsive iDrive?

POBEP · 05-11-2024, 04:46 AM

Quote:

Originally Posted by Raghza

So what's the verdict - if I don't use CIC navigation and don't store music on its hard drive, does swapping the original HDD with an SSD result in some notable improvements like a lot quicker and more responsive iDrive?

Nope.

derkemi · 06-07-2024, 07:01 AM

Where did you guys get the QNX Virtual Machine? Cant find it anymore on their homepage. Thanks

maz2331 · 08-03-2024, 06:09 PM

I have a strange issue with my SSD clone. I successfully cloned the HDD to SSD with no issues, but the new drive's partitions are not automatically mounting when the CIC restarts. I was able to telnet in to the CIC via an e-net cable and can manually mount the 5 partitions, and then NAV and other functions work as expected. What could be blocking the automount?

Arthur635d · 09-16-2024, 04:00 PM

Hi everyone,

I don't know how often this tread is visited, but I have a new method of adding an SSD into the CIC.

No more messy expensive compact flash cards.

I have designed and developed an interface board that replaces the internal CIC IDE board which is plug and play.
My interface allows a standard SATA drive to directly replace the internal IDE drive. Some disassembly will obviously be required.

Basically:

disassemble the top half of your CIC
disconnect the ribbon connected to the IDE board
remove the IDE board
fit my interface
reconnect the ribbon cable
re-assemble the CIC
fit the supplied pre setup SSD to your drive cradle
fit the cradle with SSD into your CIC
refit into car an enjoy more music space and faster maps

The interface has been tested in principle, but is still in the development stage (PCB designed, just waiting for the components).

All being well, I should have a fully working board in the next few weeks as time permits.

Arthur635d · 09-27-2024, 05:34 PM

So, I may have been a little hasty to announce an IDE to SATA converter board.

The board I have produced does work, but not entirely as designed. The CIC does recognise the presence of and tries to read a SATA drive, the activity light I built into my board shows this, but the CIC rejects the drive.

I have tested my CIC IDE image and there are no problems there. I have the same image working on a CF card with the same dual CF adapter listed in this forum by Jagaer.

So, sadly it's a no goer.

I may still be able to produce something that will do the job, but that's development for you. You can find 100 ways not to do something you just need to find the one way to make it work.

02-28-2024, 06:05 PM	#309
thecarfixer New Member 0 Rep 10 Posts Drives: E90 330i Join Date: Feb 2024 Location: UK iTrader: (0)	I tried to do this with HDD Raw Copy, on a SanDisk Extreme Pro 128Gb 160MB/s UDMA7 (black) CF card, in the Syba CF caddy. No joy, Nav won't start "Function not available". Is it my CF card that causes the problem?
	Appreciate 0 Quote

02-28-2024, 06:33 PM	#310
POBEP Lieutenant 412 Rep 583 Posts Drives: E70 E90 E91 Join Date: Mar 2016 Location: Christmas Valley, CA iTrader: (0) Garage List 2007 E91 328ix [0.00] 2011 E90 335d [9.50] 2013 E70 xDrive35d [6.17] 2009 E91 328i [9.50] 2016 F25 xDrive28d [0.00]	check (change) master/slave switch on a the Syba CF adapter __________________
	Appreciate 0 Quote

02-29-2024, 02:30 AM	#311
thecarfixer New Member 0 Rep 10 Posts Drives: E90 330i Join Date: Feb 2024 Location: UK iTrader: (0)	The CF card is in the slave side, as everyone else has done..
	Appreciate 0 Quote

05-07-2024, 09:45 PM	#312
BenGreenPlant Registered 0 Rep 2 Posts Drives: bmw e90 Join Date: Jan 2023 Location: NZ iTrader: (0)	.Boot folder from hdcddb missing I have a similar problem to some where I've followed the instructions but navigation and media are unavailable. After mounting partitions on the Syba /CF in QNX I've found the .boot folder to be missing from the CDDB folder. CIC detects the Syba / CF but after trying to load for a while it just gives up, greys out navigation and media is left in a permanent state of limbo searching for files. I have tried using sudo DD command in ubuntu and also HDD RAW program in Windows 11 to make an image of the original drive which has been put on the Syba / CF to no avail. I'm going to try clonezilla and see if anything changes. thanks for all the help everyone. UPDATE: I'm a tard and the .boot folders were hidden in QNX file manager. MD5 of clonezilla, linux DD & HDD RAW all have the same MD5 so that's good I guess. I have a feeling the poor quality of the SYBA adapter is at fault here. The pins are too short, the pcb is wonky & the CIC HDD cover wont go all the way in easily when installed etc. Will update when the new one arrives from china. Last edited by BenGreenPlant; 05-08-2024 at 08:24 PM.. Reason: updates and typos
	Appreciate 0 Quote

05-08-2024, 06:01 AM	#313
Raghza Private 14 Rep 65 Posts Drives: E92 335i N55 DCT Join Date: Oct 2022 Location: Estonia iTrader: (0) Garage List 2010 BMW 335i [0.00]	So what's the verdict - if I don't use CIC navigation and don't store music on its hard drive, does swapping the original HDD with an SSD result in some notable improvements like a lot quicker and more responsive iDrive?
	Appreciate 0 Quote

06-07-2024, 07:01 AM	#315
derkemi Registered 0 Rep 1 Posts Drives: BMW M6 E63 & BMW Z4 35i E89 Join Date: Jun 2024 Location: Austria iTrader: (0)	Where did you guys get the QNX Virtual Machine? Cant find it anymore on their homepage. Thanks
	Appreciate 0 Quote

08-03-2024, 06:09 PM	#316
maz2331 Registered 0 Rep 2 Posts Drives: 2011 328i X-Drive Join Date: Mar 2014 Location: Pittsburgh, PA iTrader: (0)	I have a strange issue with my SSD clone. I successfully cloned the HDD to SSD with no issues, but the new drive's partitions are not automatically mounting when the CIC restarts. I was able to telnet in to the CIC via an e-net cable and can manually mount the 5 partitions, and then NAV and other functions work as expected. What could be blocking the automount?
	Appreciate 0 Quote

09-16-2024, 04:00 PM	#317
Arthur635d Registered 13 Rep 4 Posts Drives: BMW 635d Join Date: Jul 2022 Location: United Kingdom iTrader: (0)	IDE to SATA interface Hi everyone, I don't know how often this tread is visited, but I have a new method of adding an SSD into the CIC. No more messy expensive compact flash cards. I have designed and developed an interface board that replaces the internal CIC IDE board which is plug and play. My interface allows a standard SATA drive to directly replace the internal IDE drive. Some disassembly will obviously be required. Basically: disassemble the top half of your CIC disconnect the ribbon connected to the IDE board remove the IDE board fit my interface reconnect the ribbon cable re-assemble the CIC fit the supplied pre setup SSD to your drive cradle fit the cradle with SSD into your CIC refit into car an enjoy more music space and faster maps The interface has been tested in principle, but is still in the development stage (PCB designed, just waiting for the components). All being well, I should have a fully working board in the next few weeks as time permits.
	Appreciate 0 Quote

09-27-2024, 05:34 PM	#318
Arthur635d Registered 13 Rep 4 Posts Drives: BMW 635d Join Date: Jul 2022 Location: United Kingdom iTrader: (0)	IDE to SATA interface So, I may have been a little hasty to announce an IDE to SATA converter board. The board I have produced does work, but not entirely as designed. The CIC does recognise the presence of and tries to read a SATA drive, the activity light I built into my board shows this, but the CIC rejects the drive. I have tested my CIC IDE image and there are no problems there. I have the same image working on a CF card with the same dual CF adapter listed in this forum by Jagaer. So, sadly it's a no goer. I may still be able to produce something that will do the job, but that's development for you. You can find 100 ways not to do something you just need to find the one way to make it work.
	Appreciate 0 Quote