[gaffasbm]

hi all . i am after the daten files for a e90 lci can someone here share this is possible . any help would be massively appreciated

[3PedalJake]

sent you a pm

[gaffasbm]

cheers. i know this sounds mad i have had to uninstall my inpaas it just wouldnt code my frm . i had tried everything but kept getting a error 106 message when selecting frm2 in the ecu family . now i cant find the kfp software online . you wouldnt happen to have this would you . thanks

[3PedalJake]

In that link I sent you, WinKFP is included in BMW standard tools.

[3PedalJake]

Be sure to open BMW coding tool and click the buttons to update SP-daten and update WinKFP

[gaffasbm]

Originally Posted by 3PedalJake

Be sure to open BMW coding tool and click the buttons to update SP-daten and update WinKFP

Thank you Jake your a legend.
I have installed it all it seems to working now only thing I have noticed is that ncs expert 1 it's in German and 2 I cannot seem to edit the profile when entering the password repxet. Nothing seems to happen . Just goes back to the home page . Could this be the way it's been installed ?
Thanks really appreciate your help .

[3PedalJake]

Did you do the replacement of the installed files with the ones under the folder you extracted as per install instructions.txt? It should be in English after that.

1. Run St212.exe using all default settings except the 4 checkbox options in the "select additional task" window regarding "backup and restore" and "create desktop/quick launch icons" .
(If using Windows 10, run in st212.exe in "Compatibility Mode" for Windows 7)

2. After install completes, select "No" to restarting PC.

3. Navigate to your C:\ drive and delete the folders labeled "EC-APPS, EDIABAS & NCSEXPER"

4. Replace those folders with the "EC-APPS, EDIABAS & NCSEXPER" from this download by copying them to the C:\ drive.

5. Copy the 3 files inside the OCX folder and paste them in the C:\Windows\Syswow64 folder. If you do not have this folder you are a 32-bit system meaning you need to paste them in C:\Windows\system32 instead.

6. Open Command Prompt as administrator & enter the following commands. Please note if your 32bit system, start on the 2nd line: If you have issues getting the commands to succeed, make sure your running command prompt as administrator.

cd c:\windows\syswow64
(Press Enter)
regsvr32 mscomctl.ocx
(Press Enter & wait for "Registration Succeeded" message)
regsvr32 msflxgrd.ocx
(Press Enter & wait for "Registration Succeeded" message)
regsvr32 comdlg32.ocx
(Press Enter & wait for "Registration Succeeded" message)

7. Place the "BMW Tools" folder(BMW icon) on your desktop. Shortcuts to all the software are inside.

8. Make sure your cable is set to COM-1 with a Latency Timer as 1 in device manager.

9. Reboot Computer.

10. Installation is complete.

[e90ineer]

Hi guys,

I'm also looking for sp-daten files for my E90 LCI. I took me a while to figure out that previous owner had flashed ECU with EGR-OFF map and I'm getting DTC errors because of it. My car is usable but it always goes into a limp mode.

I need sp-daten files for my E90 LCI (E89X). SP-Daten doesn't have files for my ECU.

ECU in question is DDE7.0, with ZB Number 8506481.

Sincerely,
e90ineer

[3PedalJake]

Originally Posted by e90ineer

Hi guys,

I'm also looking for sp-daten files for my E90 LCI. I took me a while to figure out that previous owner had flashed ECU with EGR-OFF map and I'm getting DTC errors because of it. My car is usable but it always goes into a limp mode.

I need sp-daten files for my E90 LCI (E89X). SP-Daten doesn't have files for my ECU.

ECU in question is DDE7.0, with ZB Number 8506481.

Sincerely,
e90ineer

Tried to PM you a link-

e90ineer has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.

If you are trying to send this message to multiple recipients, remove e90ineer from the recipient list and send the message again.

[e90ineer]

Originally Posted by 3PedalJake

Tried to PM you a link-

e90ineer has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.

If you are trying to send this message to multiple recipients, remove e90ineer from the recipient list and send the message again.

I'm sorry. Recently I got registered to this forum and I don't have full membership. I need to be more active on a forum. I'll get back to you when I become full member.

I appreciate help. I'll get back to you soon

[e90ineer]

Hello guys, quick update. I managed to update DDE7.0 ECU with SP-Daten files that 3PedalJake provided. They don't contain old firmware versions that was in my ECU, but those SP-Daten files contained the latest version of firmware. I managed to find out which ZB Number versions are compatible for my ECU. Here's the list if someone needs it in the future:

7811344 - Oldest
7811493
7812032
7812780
7823608
8506058
8506481 - Current
8506309
8507054
8507464
8508527
8508842
8509545
8510597
8512942
8516866 - Latest