[N54Luis]

Ok so I need help I have these codes but prior to this I was trying to replace my cigar lighter fuse. For one dumb reason I didn’t turn the car off and when I removed a fuse (which was not the cigar fuse) the car turned off and when I plugged the fuse back in and turned the car on I had the limp mode light and these codes. I’m honestly not sure where to start to try and solve this problem, I have a feeling I just fried a bunch of wires but I’m hoping that’s not the case. Note: when removing the vacuum lines on my vacuum canisters one of them had no pressure at all. Any help?

[swellengear]

Have you tried clearing the codes? Do they come straight back?

Re the canister, take it out, and have a good look. They can crack.

[N54Luis]

Originally Posted by swellengear

Have you tried clearing the codes? Do they come straight back?

Re the canister, take it out, and have a good look. They can crack.

Yes the codes would come back after I cleared them and the canisters are fine. The car was driving normally with no issues before. All this only happened after I removed a fuse with car on.