|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Limp mode and other issues
|
|
10-03-2024, 09:19 PM | #1 |
New Member
8
Rep 9
Posts |
Limp mode and other issues
Ok so I need help I have these codes but prior to this I was trying to replace my cigar lighter fuse. For one dumb reason I didn’t turn the car off and when I removed a fuse (which was not the cigar fuse) the car turned off and when I plugged the fuse back in and turned the car on I had the limp mode light and these codes. I’m honestly not sure where to start to try and solve this problem, I have a feeling I just fried a bunch of wires but I’m hoping that’s not the case. Note: when removing the vacuum lines on my vacuum canisters one of them had no pressure at all. Any help?
|
10-04-2024, 02:26 AM | #3 |
New Member
8
Rep 9
Posts |
Yes the codes would come back after I cleared them and the canisters are fine. The car was driving normally with no issues before. All this only happened after I removed a fuse with car on.
|
Appreciate
0
|
10-04-2024, 03:00 PM | #4 | |
New Member
8
Rep 9
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|