[lordnikon]

Following. Might do this as well. Please post DIY instructions

[autoAER]

Originally Posted by oVeRdOsE.

are those 18'' ?

19”, style 225m

Two of my 162’s are bent with hairline cracks otherwise I’d keep the original look

Originally Posted by StradaRedlands

Oh hell yeah... that's the way to do it right!!!!

Yes sir!

Coffee stains on gray carpet is a criminal offense

[Cal122]

Originally Posted by Hoody007

Mickey Mouse flange failed. Mercifully right as I pulled into a parking spot.

Gotta say, photo winner for the cleanest looking engine bay following a Mickey Mouse flange failure. Hope this weeks tire/flange failures are done now and you can move on to enjoying the new Xenons.

[StradaRedlands]

Originally Posted by Onizukachan

Not that I’m aware of for LCi having temp in USA except 335… but you can do what I did and get an LCi 355 cluster cheap ($35-45) scatched clear plastic is ok as you will reuse your case, and install ” perfekt toolbox” on a win 10 computer.

When you get it, connect new cluster ot car temporarily and read the guage programming off it, then swap the faces and nicer needles over on the 328… and use perfekt to convert your 328 cluster to have temp, and install the matching stepper motor steps that the 335 cluster used on rpm and mph to correctly index the mph and tach sweep since the font and everything is slightly different on 335.

Takes a couple of hours, but beats having to try to revirginize a cluster which takes even longer amd is more of a hassle.

I bought the cluster from an '07 328i E92... https://bimmer.work/vin/p81fe7fa39c6...d5681667c4112/
It lists as an N52 and not an N51, so I'm thoroughly confused why it had oil temp. Do all E92s have that?

Do you presume I can skip the rpm/tach changes as they will be the same? And just pull the oil temp numbers?

I've been reading this thread, and should probably post question there, but here we are...
https://www.e90post.com/forums/showthread.php?t=1590205

[Onizukachan]

Black lines now installed,
had to replace a rear brake carrier bolt as one worked loose and disappeared.
Quick trip to junkyard and was quickly sorted.
then gave it a quick wash since temps were moderately cool and there was shade. Still need to give interior a wipe down.
Love how wet the style 95 wheels look when clean.


Love the “bone stock pre-FL interior”,
Btw just in the last interior close up pic there are at least 6 mods visible,
can you spot them all? (Aka Where’s Waldo for e9x geeks)

[Onizukachan]

Originally Posted by StradaRedlands

I bought a cluster from an '07 328i E92... https://bimmer.work/vin/p81fe7fa39c6...d5681667c4112/

Do you presume I can skip the rpm/tach changes as they will be the same? And just pull the oil temp numbers?

I've been reading this thread, and should probably post question there, but here we are...
https://www.e90post.com/forums/showthread.php?t=1590205

Yes, in that case it’s just face swap and coding the temp instead of mpg then.

[oVeRdOsE.]

Originally Posted by Hoody007

Mickey Mouse flange failed. Mercifully right as I pulled into a parking spot.
Waiting on a tow. Have the aluminum flange coming in Monday - wish it was this weekend, but, well. Failed under pressure so in addition to a mess everywhere I’ll need to bleed + refill my cooling system…

People: If you haven’t changed yours yet, if it’s been a while and it’s plastic. Just change it!! Save yourself the hassle!!!

Oh. And the new headlights came in. That was going to be the project this weekend.

thank you for this post.

Just reminded me that I bought a alu flange for my N52 before my swap, and I never used it.

And my N55 is 170k km, all original, no maintenance on it but oil.

So your post buttkicked me to do the flange, and oh boi it was close,

[Hoody007]

Originally Posted by Cal122

Gotta say, photo winner for the cleanest looking engine bay following a Mickey Mouse flange failure. Hope this weeks tire/flange failures are done now and you can move on to enjoying the new Xenons.

Thank you Wasn’t too bad of a mess!

Mickey Mouse flange is in - key for reference is using silicone spray. Passenger headlight is in, drivers side soon to follow…

[OiramAvlis]

Started a Cruise Control Retrofit

[Efthreeoh]

Opened up the cockpit to let the sun in to dry out. First time in 18 years the sunroof drains were overwhelmed.

[StradaRedlands]

Originally Posted by Onizukachan

Love the “bone stock pre-FL interior”,
Btw just in the last interior close up pic there are at least 6 mods visible,
can you spot them all? (Aka Where’s Waldo for e9x geeks)

The Blacklines are sooooo nice... my favorite upgrade and I didn't really even know they were out there as an option!

OK, here goes (from both interior pics):
Oil temp
Velocity display
M Sport steering wheel
M Sport shift knob
Metal start button
CIC update
LCI cupholder
aluminum trim?

[StradaRedlands]

Originally Posted by oVeRdOsE.

thank you for this post.

Just reminded me that I bought a alu flange for my N52 before my swap, and I never used it.

And my N55 is 170k km, all original, no maintenance on it but oil.

So your post buttkicked me to do the flange, and oh boi it was close,

Serious, Hoody007 is inspiring a lot of people this weekend!

[StradaRedlands]

Originally Posted by Efthreeoh

Attachment 3570026Opened up the cockpit to let the sun in to dry out. First time in 18 years the sunroof drains were overwhelmed.

How are you liking the Gladiator? I read that this is the last year for a manual transmission on them.

[Onizukachan]

Took it to cars n coffee this morning.

On way home spotted a Barrique Rot e90 in a parking lot so had to stop to take a couple pics w/ it.

It was sun faded and sunburned but very obviously BR (beige interior)

[StradaRedlands]

Originally Posted by Onizukachan

Took it to cars n coffee this morning.

On way home spotted a Barrique Rot e90 in a parking lot so had to stop to take a couple pics w/ it.

It was sun faded and sunburned but very obviously BR (beige interior)

Poor lil' E90, nobody to love it... :-(

[Onizukachan]

Actually it was in pretty good shape for 2006… I saw new repeaters, the lights and interior well cared for, matching tires all around… I’m guessing someone in the past didn’t have a garage. My former e46 touring now has pink inners and the clear is totally failed on roof hood tailgate etc after 4-5 years of no garage. Sun out here is no joke.

[Gilgamešas]

Do you by any chance know where I could find those T-shaped expanding plastic rivets that hold the door wiring harness attached to the door?

[StradaRedlands]

Originally Posted by Gilgamešas

Do you by any chance know where I could find those T-shaped expanding plastic rivets that hold the door wiring harness attached to the door?

This may help with the part #: https://www.realoem.com/bmw/enUS/sho...diagId=61_1896