[B21]

Originally Posted by SlowE92

Anyone run MHD stage 2+ on 95 octane have a dyno done?

Yes did several runs 400 BHP at crank compared to 343 stock..that’s on a Z4 E89 35is..

Over 650nm vs 500 nm stock

[SlowE92]

Originally Posted by B21

Yes did several runs 400 BHP at crank compared to 343 stock..that’s on a Z4 E89 35is..

Over 650nm vs 500 nm stock

Dang only 400 bhp?.. Not downplaying you but i've seen people with 380 Whp on stage 2+ 93 octane. Was just curious what the bump would be from 95 octane since ethanol is nonexistent where I live. But I run the madditive octanium unleaded with 10 gallons of 91 and run the 95 octane map and have basically no timing corrections and logs look good.

[AlexKoast]

Took my car to the Dyno on Saturday

433 wheel horsepower which is somewhere between 480 to 509 depending on who you ask

Full mod list for those curious:

- RB Two's upgraded 15T Turbos
- Custom tune for 18 PSI on pump gas
- VRSF Relocated Inlets
- ARM 2 inch outlets
- VRSF 7 inch intercooler
- VRSF Charge pipe with Tial BOV and larger diameter lines
- Index 12 Injectors
- PR Walbro 450 Fuel Pump
- EKP3 module with active cooling from Arc terminator
- Upgraded MOSFETS in the DME 🫠
- Turner relocated aluminum expansion tank
- relocated vacuum cannisters
- 335is clutch
- Dual Sheer Selector Rod (although switching to RTD is tempting)
- VRSF Downpipes
- PE Mod
- 335is Clutch
- Bilstein B14 Coilovers
- M3 control arms (front)
- Dinan Camber Plates
- F30 M Sport Front brakes
- 135i Brembo rear brakes
- SS Brake Lines
- 18x9.5 Square Style 260m wheels
- 235/40/18 Front, 265/35/18 Rear
- M3 style Front bumper with custom splitters by yours truly
- M Sport Rear bumper custom vented by yours truly

[lowrydr310]

Originally Posted by AlexKoast

Took my car to the Dyno on Saturday

Nice setup on a great looking car. I really like that sound too. Great power from minimal modifications; inlets/outlets/downpipe/CP/IC/LPFP, and 'only' on 18psi. What fuel are you running?

I'd been considering the twos when it's time to replace my stock turbos, but I'm limited to retaining OEM downpipes so not sure if there's any benefit there.