E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > NA Engine (non-turbo) / Drivetrain / Exhaust Modifications > Clutch wont engage any gear - Maybe Throwout bearing?



Reply
 
Thread Tools Search this Thread
      10-04-2024, 03:52 PM   #1
Goodtofufriday
Registered
0
Rep
1
Posts

Drives: BMW 2007 E92
Join Date: Oct 2024
Location: NYC

iTrader: (0)

Exclamation Clutch wont engage any gear - Maybe Throwout bearing?

New to this forums but not bmws!

Just looking to spitball ideas here before i throw a ton of parts at the problem. I work on cars, last one was a miata i rebuilt top down. My first ever car was a 94 V8 530i, and so i wanted to get back to bmw.

Car has 140k miles. 2007 e92 model.

i recently got the car and don't have much on maintence history. Was driving it around to get a feel of what needed to be worked on. The After two hours the clutch refused to get into any gears. ABS light is on, the break fluid is dark AF and for sure has to be replaced. I learned clutch uses the same fluid.

When i start the car there is an exceptional grinding noise with the pedal down on the clutch. I wouldnt say it goes to the floor but there isnt much resistance either. The brake pedal is hard to push down as well. I noticed when i stopped (failed in my drive way thank god) that there was liquid on the pavement. Initially thought it was a fluid leak. But its completely dissappeared which makes me think it was water. odd part is it was under where the front of the car was sitting.

My thought is throwout bearing went bad. But as ive never worked on a car that shares its brake and clutch system I wanted to get some other thoughts here.

Thanks for your guys input/help! Glad to be here. Just wish I got to drive it more before it became another project!
Appreciate 0
      10-22-2024, 01:15 PM   #2
chris55552
Private First Class
90
Rep
185
Posts

Drives: 2017 BMW x3 35i 2012 E92 328XI
Join Date: Jul 2023
Location: alexandra LA

iTrader: (0)

A year ago at about 85k miles I pulled out from a dead stop and ran the rpms up to about 5k and when I shifted from 1 to 2 something mechanical gave and I loss the ability to shift out of second, it was below 30 degrees and my family was in florida for the week so I had to get myself out of that mess. Its no joke trying to make it home with one gear, and no ability to come to a complete stop. You got to think ahead lol!! Anyway my clutch gave as it was worn, which was the catalyst to get a new one installed but not without problems. I took it to the way wrong shop and the idiots messed up more than they fixed before I finally pulled the plug on them. Lesson learned, it could easily be your clutch, in fact thats where my money is if i had to guess. A good luk clutch kit runs about 5 to 6 hundred, flywheel a little more. I went ahead and replaced the clutch pedal, pivot pin, clutch pedal pins, pedal stop you name it but that was because the idiots tore it up. Best of luck
Appreciate 0
      10-24-2024, 01:29 PM   #3
firesnatch
Private
27
Rep
51
Posts

Drives: 2008 328i 6MT
Join Date: Apr 2011
Location: Aurora, IL

iTrader: (0)

The clutch uses brake fluid. There is a bleed valve for the clutch underneath the car. Was the fluid on the ground brake fluid perhaps? You could pump the clutch and open the bleed valve and make sure there is fluid in there still. Otherwise, yeah your clutch might be shot.
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:51 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST