LCI Paddle Shifters wire connector disconnect

Azzai80 · 10-22-2024, 09:39 PM

Okay... so I don't want to break this but I am having trouble pulling out this red wire connector that goes into the buttons from my LCI shifters. I am working on the retrofit and need to do some soldering

Is there a way to release it without forcing it? I was thinking of jamming a screwdriver in there. Tried some pliers lightly... no dice

Advice from someone in the know?

Azzai80 · 10-22-2024, 09:51 PM

Quote:

Originally Posted by Azzai80

Okay... so I don't want to break this but I am having trouble pulling out this red wire connector that goes into the buttons from my LCI shifters. I am working on the retrofit and need to do some soldering

Is there a way to release it without forcing it? I was thinking of jamming a screwdriver in there. Tried some pliers lightly... no dice

Advice from someone in the know?

Well I finally got it with a bit more force and some needle nose pliers if anyone else has troubles.

ppointer · 10-23-2024, 01:30 PM

It is way easier if you remove the trim from the wheel. Three screws behind the wheel. I think T12? Definitely T's if my memory of the size is wrong. Anyway, much simpler to mess with the wiring if you have the trim off.

codeterrorist · 10-23-2024, 01:48 PM

For future reference, I used a microfiber towel or really any thin towel and pliers. That's it.

Azzai80 · 10-23-2024, 01:56 PM

Quote:

Originally Posted by ppointer

It is way easier if you remove the trim from the wheel. Three screws behind the wheel. I think T12? Definitely T's if my memory of the size is wrong. Anyway, much simpler to mess with the wiring if you have the trim off.

Quote:

Originally Posted by codeterrorist

For future reference, I used a microfiber towel or really any thin towel and pliers. That's it.

It may have been easier to remove the trim but I ended up getting it done without doing that.

Maybe you guys know how to get the little connector open so the wire can be moved as the instructions on burger motorsports website. I’m afraid I am going to break it from lack of knowledge. It’s the last step!

Azzai80 · 10-23-2024, 07:50 PM

I got it!

Paddles are done, now I need to do the harness. That’s tonight then wheel goes on!

ppointer · 10-23-2024, 09:08 PM

Quote:

Originally Posted by Azzai80

I got it!

Paddles are done, now I need to do the harness. That’s tonight then wheel goes on!

I have done this mod. It was totally worth the effort.

Azzai80 · 10-25-2024, 06:07 PM

Quote:

Originally Posted by ppointer

I have done this mod. It was totally worth the effort.

I got it done! Works great. Feels like a diff car with new wheel and shifters

10-22-2024, 09:39 PM	#1
Azzai80 Enlisted Member 18 Rep 47 Posts Drives: 2012 E93 335i Join Date: Dec 2023 Location: Southern California iTrader: (0)	LCI Paddle Shifters wire connector disconnect Okay... so I don't want to break this but I am having trouble pulling out this red wire connector that goes into the buttons from my LCI shifters. I am working on the retrofit and need to do some soldering Is there a way to release it without forcing it? I was thinking of jamming a screwdriver in there. Tried some pliers lightly... no dice Advice from someone in the know? Attached Images
	Appreciate 0 Tweet Quote

10-23-2024, 01:30 PM	#3
ppointer Major 861 Rep 1,181 Posts Drives: '01 Z3M, '12 335is, '22 540i Join Date: Jul 2013 Location: FLL iTrader: (4) Garage List 2012 BMW 335i [5.25] 2012 BMW 335is [5.00] 2008 Infiniti QX56 [0.00] 1967 Chevrolet Corv ... [10.00] 2001 M Roadster [10.00] 2022 BMW 540i [0.75] 2009 528i [9.50]	It is way easier if you remove the trim from the wheel. Three screws behind the wheel. I think T12? Definitely T's if my memory of the size is wrong. Anyway, much simpler to mess with the wiring if you have the trim off.
	Appreciate 1 Azzai8017.50 Quote

10-23-2024, 01:48 PM	#4
codeterrorist Private First Class 184 Rep 196 Posts Drives: 328i Join Date: May 2020 Location: Earth iTrader: (0)	For future reference, I used a microfiber towel or really any thin towel and pliers. That's it.
	Appreciate 1 Azzai8017.50 Quote

10-23-2024, 07:50 PM	#6
Azzai80 Enlisted Member 18 Rep 47 Posts Drives: 2012 E93 335i Join Date: Dec 2023 Location: Southern California iTrader: (0)	I got it! Paddles are done, now I need to do the harness. That’s tonight then wheel goes on!
	Appreciate 0 Quote