|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
please help. idrive displaying "please wait..." when trying to connect Bluetooth
|
|
10-24-2024, 05:43 AM | #1 |
New Member
0
Rep 19
Posts |
please help. idrive displaying "please wait..." when trying to connect Bluetooth
I recently bought a 2008 e92 335i. With it being an older car I did expect some issues here and there.
I am having issues with the idrive. More specifically it is slow and lagging in the menus. I am also unable to use Bluetooth as it just displays “please wait…” all the time. I also cannot seem to change the mode of my car into sport or sport plus as when I do nothing happens. The back left speaker in the rear of the car is also not working. I have plugged a code reader into the car and these are the codes I have received. The two wing mirror error codes are abit odd as I am pretty sure I don’t have automatic mirrors. (I have the CIC idrive) Any help or advice will be much appreciated. Thank you! |
10-24-2024, 03:31 PM | #2 |
Lieutenant General
2045
Rep 13,363
Posts |
There was only bluetooth phone in cars up until around 2010 at least in the United States . Then you had to have a certain level of idrive and a combox to get streaming music. Also even bluetooth phone was and option not all cars came with from 06 to 09.
Check for the options your car came with using Mdecoder.com or one of the other Vin decoders. No idea of what your scanner is but not all scanners give good results with a BMW . |
Appreciate
1
335i-zac0.00 |
10-25-2024, 06:32 AM | #3 | |
New Member
0
Rep 19
Posts |
Quote:
|
|
Appreciate
0
|
10-25-2024, 06:45 AM | #4 | |
New Member
0
Rep 19
Posts |
Quote:
|
|
Appreciate
0
|
10-25-2024, 07:13 PM | #5 |
Lieutenant General
2045
Rep 13,363
Posts |
So we know you have 6FL now read the link I provided on TCU and Mulf types.
Also when it says preparation for anything that means it's not installed. In the case of bluetooth phone in a 2008 that means the programming is not enabled for bluetooth phone. You probably have all the hardware for it though. At least in the US Pre Wiring meant that the wiring fro the module was there . If looks like you have the modules you just need to enable the bluetooth. The early Nav's in the US where disc based (DVD ) which means they are slow and the ones in Europe may be different I believe there are two models there. See Idrive subforum . Last edited by ctuna; 10-25-2024 at 07:20 PM.. |
Appreciate
0
|
Bookmarks |
|
|