|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
335IS Single Turbo Build Questions
|
|
Yesterday, 03:16 PM | #1 |
Registered
0
Rep 1
Posts |
335IS Single Turbo Build Questions
Hey guys!
So I am hoping to get just a little bit more insight, due to some unfortunate events, my engine seized. This happened about two weeks after the oil level sensor went out. I did not notice any serious oil leaks during those two weeks, but I was busy and did not have time to fix it. Well, it seized up when I was on my way home, got it towed to my mechanic. Found that there was a small puncture in the oil pan, no clue how it happened, but it did. Leaves me with the decision to scrap it or replace the engine. I ended up replacing the engine. Sourced an n54 out of Cali with 47k miles on it. Engine looked real good, did have some things that need to be replaced. As far as maintenance goes on the "new" engine, I will be doing pretty much all of it. Index 12 injectors ( the prices of these are absolutely bonkers and I am trying to source a way to get them somewhat cheaper), water pump ( and hoses), pulleys (staying oem), belts, vacuum lines, valve cover, all the coolant hoses etc. You get the idea. What I want to make sure is that I have everything necessary to keep this a relatively safe build. My goals are to keep this in the 600-650 range ( will be having MHD custom tune it). Ill list all the parts that I currently have/are being shipped below. If anyone could give some insight on something additional I might need or if I will be fine with what I currently have, I would greatly appreciate it. SPEEDTECH N54 PULSAR 6466 BB TOP MOUNT KIT • Pulsar 6466 BB T4 Open, 0.96 A/R Turbo • T4 Manifold with studs and nuts (Ceramic or Non-Ceramic options) • 2 piece Stainless Steel Tubing • Stainless Steel Wastegate Pipe ( Open Dump) • V-Band Clamps • Billet CNC Aluminum Oil & Coolant Plugs, O-rings • Stainless Braided -4AN Oil Feed Hose, AN Fittings • Stainless Braided -10AN Oil Drain Hose • Stainless Steel -10AN Turbo Drain Fitting • Stainless Steel -10AN To Engine Block Fitting • Aluminum Charge Pipe • Silicone Couplers • Coolant Expansion Tank Relocation Kit Stage 2 Bucketless LPFP Upgrade with Walbro 525 BMS E Chassis 7.5" High Density RACE Replacement Intercooler Upgrade • 3" Including matching IC & Chargepipe couplers 3.5 BAR TMAP Sensor & PNP Adapters for N54 BMS Aluminum Replacement Charge Pipe TIAL Q 50mm BOV Tial BOV Flange B58 Ignition Coils x6 B58 Ignition Coil Upgrade Adapter Kit N54 B58 NGK 94201 Performance Spark Plugs - Set of 6 MAC Single Turbo Solenoid |
Today, 01:30 AM | #2 | |
First Lieutenant
115
Rep 371
Posts |
Quote:
__________________
2007 E92 335i - MHD, Turbo Technics 19T's
2008 E60 535XI - JB4 2010 E92 335i - JB4, Borg Warner EFR 8374 |
|
Appreciate
0
|
Bookmarks |
|
|