Noise from driver side wheel

rowsell71 · 10-29-2024, 02:57 AM

Hi,

Hope you can help. I have a 325i 2009 and I have a noise from the front driverside wheel. I have changed the susspension, tie rods, both wishbones all round and now the roll bar bushes.

When driving and the natural humps in the road no noise and a comfortable ride.

But when I hit a small hole or sunken drain cover even going slow I get a bang that sounds like my alloy wheels hit the road with no tyre on. It concerns me that if I'm going more than 30mph my wheel or what ever is being hit will fail and cause an accident. It's passed an MOT so I'm now stumped.

Any ideas?

Thanks.

Phil325i · 10-29-2024, 05:15 AM

Hard to diagnose a noise without hearing it, but have you checked the brakes? Try stripping and rebuilding with anti seize.

rowsell71 · 10-29-2024, 08:21 AM

Hi Phil, I have changed wheel bearing, discs and pads. The noise is a heavy thud and it sends vibration up the steering wheel and can feel in the footwell like metal on metal or if you have a flat tyre and drive in a pot hole the sound of road meeting alloy wheel.

Phil325i · 10-29-2024, 10:07 AM

Quote:

Originally Posted by rowsell71

Hi Phil, I have changed wheel bearing, discs and pads. The noise is a heavy thud and it sends vibration up the steering wheel and can feel in the footwell like metal on metal or if you have a flat tyre and drive in a pot hole the sound of road meeting alloy wheel.

Drop links? Control arm bushings?

rowsell71 · 10-29-2024, 12:23 PM

Thanks Phil

Changed all of them.

I am now wondering if the control arm is hitting. When I look at the lower bush where it joins the car it looks like it's touching the bracket. No gap, so was wondering moving up and down ok but if knocked backwards it hits the subframe?

10-29-2024, 02:57 AM	#1
rowsell71 Registered 0 Rep 4 Posts Drives: BMW 325I Join Date: Jul 2023 Location: Suffolk iTrader: (0)	Noise from driver side wheel Hi, Hope you can help. I have a 325i 2009 and I have a noise from the front driverside wheel. I have changed the susspension, tie rods, both wishbones all round and now the roll bar bushes. When driving and the natural humps in the road no noise and a comfortable ride. But when I hit a small hole or sunken drain cover even going slow I get a bang that sounds like my alloy wheels hit the road with no tyre on. It concerns me that if I'm going more than 30mph my wheel or what ever is being hit will fail and cause an accident. It's passed an MOT so I'm now stumped. Any ideas? Thanks.
	Appreciate 0 Tweet Quote

10-29-2024, 05:15 AM	#2
Phil325i Brigadier General 638 Rep 3,212 Posts Drives: E92 325i MSport Coupe Join Date: Apr 2012 Location: UK South East iTrader: (1) Garage List 2009 BMW 325i Coupe [6.00]	Hard to diagnose a noise without hearing it, but have you checked the brakes? Try stripping and rebuilding with anti seize. __________________ E92 pre-LCI 325i - Ohlins R&T; H&R spacers; M3 strut brace; Swift thrust sheets; 3 x chassis braces; diff brace; N53 V-brace; 034 subframe inserts; BMS clutch stop; BMS CDV; RE g/box mounts; Delrin shift bushes; Saikoumichi OCC; Cyba scoops; BMW Perf Exhaust; HEL s/steel brake hoses; M3 rear spoiler; Recaro Sportster CSs; M3 white dash LEDs; LED Angels; LED side repeaters; BMW Perf black grille; CSL reps; SSDD carbon diffuser; Monster Wrap black roof/clear front
	Appreciate 0 Quote

10-29-2024, 08:21 AM	#3
rowsell71 Registered 0 Rep 4 Posts Drives: BMW 325I Join Date: Jul 2023 Location: Suffolk iTrader: (0)	Hi Phil, I have changed wheel bearing, discs and pads. The noise is a heavy thud and it sends vibration up the steering wheel and can feel in the footwell like metal on metal or if you have a flat tyre and drive in a pot hole the sound of road meeting alloy wheel.
	Appreciate 0 Quote

10-29-2024, 12:23 PM	#5
rowsell71 Registered 0 Rep 4 Posts Drives: BMW 325I Join Date: Jul 2023 Location: Suffolk iTrader: (0)	Thanks Phil Changed all of them. I am now wondering if the control arm is hitting. When I look at the lower bush where it joins the car it looks like it's touching the bracket. No gap, so was wondering moving up and down ok but if knocked backwards it hits the subframe?
	Appreciate 0 Quote