[x400]

Can anyone help me with a DRL issue i am having?

The DRL lights are just flickering, i have changed the LED modules in both headlights and its made no difference.
New battery installed, also checked the coding - nothing seems obviously wrong.

Also no fault codes showing

Any ideas ?

Any help will be much appreciated

[codeterrorist]

E9x didn't come with LED lights. You need to get your hands on a coding software.
I recommend Protool since it's easy to use and convenient. You do need an Android device to install it and use it.

Also, when you say flickering, is that when you unlock/start the car and then goes away or always flickering?
You can disable hot and cold checks and play around with the voltage etc.

[x400]

Originally Posted by codeterrorist

E9x didn't come with LED lights. You need to get your hands on a coding software.
I recommend Protool since it's easy to use and convenient. You do need an Android device to install it and use it.

Also, when you say flickering, is that when you unlock/start the car and then goes away or always flickering?
You can disable hot and cold checks and play around with the voltage etc.

This is the issue that i am having. I noticed the Front indicators sometimes strobe flash.

For coding i use Carly - should i be using something else?
I know the coding has been played with, i am not sure what all the values should be in the FRM.

Thanks

[x400]

Originally Posted by x400

This is the issue that i am having. I noticed the Front indicators sometimes strobe flash.

For coding i use Carly - should i be using something else?
I know the coding has been played with, i am not sure what all the values should be in the FRM.

Thanks

Sorry for bad GIF

[codeterrorist]

That image is not animated. Just a still.
Regardless, I never used Carly. With Protool, you can factory default modules and it also tells you what has been changed from a factory value.
No idea if Carly can do that or not.

Also, you might end up having to replace the bulbs with better ones.