[tmcffmn]

Originally Posted by 335dsleeper

PM me for egr only delete tune info.

Do you guys have a tune for the egr delete?

[sha1]

[QUOTE=torqueisking;21918081]Yet another EGR delete thread but I just had to share this one as it works really well and can be easily reversed for those of us in emission testing regions.

Credit for this discovery goes to TDIwyse who mentioned the effect of no...............

Sorry getting in an older post but it's relevant. I got a 2009 X5 35d (USA), code P2457 for EGR and randomly power loss on hilly streets so I thought to do the EGR bypass through the paper clip trick but apparently it didn't work.
I did the process exactly as mentioned by you, also saw the video through the link you provided. After completion got a new code P0405 and vehicle going into limp mode. Had to plug back the #5 black wire and then vehicle drives normal. Any views?

[netwolf]

[QUOTE=sha1;27818355]

Originally Posted by torqueisking

Yet another EGR delete thread but I just had to share this one as it works really well and can be easily reversed for those of us in emission testing regions.

Credit for this discovery goes to TDIwyse who mentioned the effect of no...............

Sorry getting in an older post but it's relevant. I got a 2009 X5 35d (USA), code P2457 for EGR and randomly power loss on hilly streets so I thought to do the EGR bypass through the paper clip trick but apparently it didn't work.
I did the process exactly as mentioned by you, also saw the video through the link you provided. After completion got a new code P0405 and vehicle going into limp mode. Had to plug back the #5 black wire and then vehicle drives normal. Any views?

I would advice to bring car to the repair shop. It could be many things.

https://www.obd-codes.com/p2457

[COUWK]

Hi, my 2014 535d has the same N57 engine as the one in your vehicle i believe.
When you say you performed this mod, you just removed pin#5 wire and plugged the connector back in?
Did you have a tune done as well?
If not, I assume you have the check engine light then?
Cheers



[QUOTE=Bob777;24987426]I was using this fix for year an a half on my 2014 X5 F15 35D. It works fine. My personal record was 5.2L/100km

[COUWK]

Hi, what year/engine?
N57?
I have a 2014 535d (LCI), with N57.
Did you have the EGR tuned out?
Cheers,

Originally Posted by torqueisking

I've been using this mod on my X5 35D since July/17. That was 40,000 KM ago and I haven't had any issues or objectionable CBU (confirmed my ISTA calculated and measured MAF CBU test).

[christoepurrr]

I completed this DIY on my LCI E70 X5D following the guide, though encounter 3 EGR related codes (40D4, 4C9E, 4CAE). CEL is on, but drivability wise everything seems ok. Just verifying to confirm I did everything correctly and no other issues should arise.

[Andy198712]

Surely with the EGR codes it won’t regen on the N57?

[Staub]

Originally Posted by DrLxus

That 90 degree portion comes apart. You'll need to open it to get to the black wire.

Do you know of any guides with pictures or a video on how to do this without breaking anything in the process? I have a similar connector on my car and I'd be curious to gives this mod a try.

Could you maybe post some pics/video if you have the same kind of connector?

[PLuKE]

Does this work on a F30 330d?

Thank you!!

[turbo97se]

Hi there

I stumbled on this thread whilst looking for EGR/Intake manifold cleaning articles. I was wondering if you did this on your 335D (now sold) or your BMW F10? I am looking to do something soon and then perhaps install the EGR block off plates later.

Thanks

Originally Posted by JT8Diesel

Did this today. Will check fuel economy on my next drive to work (most consistent driving I do).

Normally around halfway there I see Distance to Empty + Traveled = 1060 km +/-

My car had a weird "transition" piece from the wire loom to the connector. Had to remove that first.

[compsyndrome]

Looks like at least one person had luck with F15. Any others?

[Kazana]

BMW X1 2012 s drive E84
I've been experiencing intermittent loss of power whilst driving and looking at sensor values via bimmerlink I've found that when the car loses power or goes into limp mode, the egr command value % was fluctuating everytime I had a dip in power. It happens on most lower gears and at high speeds since the valve is closed I don't experience any loss in power unless I reduce speed by letting go of accelerator and then try to gain that speed again it fluctuates slightly. At low gears power dips constantly.

I removed the egr valve and cleaned it inside out with carb cleaner and even cleaned the electronic motor part.

So now I can confirm on the BMW X1 e84 model the hack works. I ended up braking the flap to expose the wires when trying to reinstall it lol see pictures attached.
I've wrapped the black wire with electrical tape and will drive it around a bit more later today and to work tomorrow evening so will see how coolant temp and egr behaves.

This is a temp fix for me as I think I'll get it coded out after I blank it next month.

I did have codes already based on the egr system but no new codes have flashed yet. Maybe after another 20 miles a new code will pop up. Otherwise it will be an easy fix to just reinsert the black wire if it happens on the way to work

[Kazana]

Update on the X1 now I'm seeing an eml on dash with 8 new egr related codes. I had 4 already, however there is no more reduced power and the car drives better. Can egr closed valve constant cause the swirl flaps to malfunction or break apart?

[Kazana]

So final update on the X1 e84, it seems the egr valve starts to fluctuate from 0% to 30-40% when a regen is happening but after a regen is finished it goes back to 0% and stays that way.

My mpg has improved significantly and I reset the obd codes and now only see 4CAE. At least it won't be ruining my turbo till I have the time to do the full removal and delete and maybe even a stage 1 eco map.

[Abhishek e90]

Has anyone got a picture of the blanking plate they used and where to install it?
i unplugged my egr and i'm not getting any check engine light or a warning on the dashboard? Does this mean the previous owner has removed it electronically already?

Thanks.