PDC and RAD1 conflict

blondeadvisory · 11-07-2024, 05:07 AM

Hi everyone.
I have a problem with my E91 2007 318d (REAR PDC only).
Someone probably has replaced the original radio, because now it's a BUSINESS CD from 2011 (RA9232250011).

I can't see the PDC volume control in the settings and no beeping when reversing. I have tested all the sensors in INPA and they show proper values and distances.

I have read on the internet to process the car in NCS Expert to default settings with empy files.

It worked - PDC is now avalible in radio settings and it beeps, but the radio doesn't make any sound on any mode and I can't eject the CD.

Problem dissapears when I reset radio to default settings through INPA - but then again the PDC doesn't work and is not showing in the settings.

Does anyone know what to do?

Error while CODIERDATEN_LESSEN from RAD1:

Code:

Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RAD1

Error COAPI2.CPP coapiRunCabd 6
SG antwortet nicht CODIERDATEN_LESSEN

FA:

Code:

E91_#0907&ALAT%0A22$1CA$1CB$1CC$1CD$240$249$2BW$2PA$321$386$441$4AG$507$520$534$548$662$7RP$843$854$863$886$8S3*VW11-A090

11-07-2024, 05:07 AM	#1
blondeadvisory Registered 0 Rep 1 Posts Drives: BMW E91 Join Date: Nov 2024 Location: Poland iTrader: (0)	PDC and RAD1 conflict Hi everyone. I have a problem with my E91 2007 318d (REAR PDC only). Someone probably has replaced the original radio, because now it's a BUSINESS CD from 2011 (RA9232250011). I can't see the PDC volume control in the settings and no beeping when reversing. I have tested all the sensors in INPA and they show proper values and distances. I have read on the internet to process the car in NCS Expert to default settings with empy files. It worked - PDC is now avalible in radio settings and it beeps, but the radio doesn't make any sound on any mode and I can't eject the CD. Problem dissapears when I reset radio to default settings through INPA - but then again the PDC doesn't work and is not showing in the settings. Does anyone know what to do? Error while CODIERDATEN_LESSEN from RAD1: Code: Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1 SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RAD1 Error COAPI2.CPP coapiRunCabd 6 SG antwortet nicht CODIERDATEN_LESSEN FA: Code: E91_#0907&ALAT%0A22$1CA$1CB$1CC$1CD$240$249$2BW$2PA$321$386$441$4AG$507$520$534$548$662$7RP$843$854$863$886$8S3*VW11-A090
	Appreciate 0 Tweet Quote