[ORIAX710]

I have a 2011 BMW 335 ixdrive I believe it's the N55 and I just want to replace (not upgrade) the original TMAP sensor the car came with.
I do not wish to upgrade the sensor, I've seen lots of forums/videos about upgrading to 3.5 bar etc etc. I'm not looking for that right now.

When I purchased the car from seller, the seller included
https://www.bmwpartsdeal.com/parts/b...tra2=&filter=()
^
The problem I am seeing is that this tells me it DOES NOT fit my BMW.
The part located below says it DOES fit my BMW.

-part below states that it ranges from years 2008-2020
-part above states that it ranges from years 2012 -2020
The sensor I have has the part # of the one that tells me it DOES NOT fit my BMW, but it looks like the sensor that tells me it DOES fit my BMW.
(sensor I have has green o-ring, not a blue one.)

https://www.bmwpartsdeal.com/parts/b...n=pd:209412,08

My questions would be:

1: Is this part located in the second link above, the correct replacement for the original BMW sensor the car came with?

2: When replacing the original (not upgrading), Do I need to plug into a diagnostic/computer or mobile app as I would if I were to upgrade the TMAP/boost?

3: Was I just given an entirely wrong sensor from the seller?

[fastboatster]

1. yes
2. no
3. yes

[TheGoodTheBadTheUgly]

Originally Posted by ORIAX710

I have a 2011 BMW 335 ixdrive I believe it's the N55 and I just want to replace (not upgrade) the original TMAP sensor the car came with.
I do not wish to upgrade the sensor, I've seen lots of forums/videos about upgrading to 3.5 bar etc etc. I'm not looking for that right now.

When I purchased the car from seller, the seller included
https://www.bmwpartsdeal.com/parts/bmw-pressure_sensor-13628644433.html?vin=WBAPL5G57BNN22664&make=BMW&mo del=335i%20xDrive&year=2011&submodel=Sedan(E90)&ex tra1=&extra2=&filter=()
^
The problem I am seeing is that this tells me it DOES NOT fit my BMW.
The part located below says it DOES fit my BMW.

-part below states that it ranges from years 2008-2020
-part above states that it ranges from years 2012 -2020
The sensor I have has the part # of the one that tells me it DOES NOT fit my BMW, but it looks like the sensor that tells me it DOES fit my BMW.
(sensor I have has green o-ring, not a blue one.)

https://www.bmwpartsdeal.com/parts/bmw-pressure_sensor-13627599042.html?vin=WBAPL5G57BNN22664&make=BMW&mo del=335i%20xDrive&year=2011&submodel=Sedan(E90)&ex tra1=&extra2=&filter=()&location=pd:209412,08

My questions would be:

1: Is this part located in the second link above, the correct replacement for the original BMW sensor the car came with?

2: When replacing the original (not upgrading), Do I need to plug into a diagnostic/computer or mobile app as I would if I were to upgrade the TMAP/boost?

3: Was I just given an entirely wrong sensor from the seller?

Hello, pretty sure you have received a 3.5 Bar sensor which is used post E9X.

A little tip for the future is using the website realoem. Just google it, put in your 7 last digits of your VIN and find the part you need.

It gives you a list of the parts your car came with and what parts can supersede it and still be compatible.