|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Logic 7 Replacements/Additions
|
|
Today, 11:17 AM | #1 |
Registered
0
Rep 2
Posts |
Logic 7 Replacements/Additions
Hi guys - I want to make some replacements/additions to my Logic 7 677 sound system in my e92. This is my first time modifying an audio system and will take the parts to an audio shop to have it installed and tuned.
1) The only thing I want to keep are all of the speakers. From the documentation I read there are 9 channels total: 7 rated as 40w/2ohm and 2 rated as 70w/ohm. As far as I can tell, BMW does not publish RMS specs so I’m kind of at a loss as far as knowing how much power these factory L7 speakers can take? I also plan on adding a Rockford fosgate 10 in sub in my trunk that is 2ohm/500w RMS. The amp is monoblock and rated as 500w rms at 2ohm or 300w rms/4 ohm. 2) I do not have satellite radio, phone or Bluetooth in my current stock logic 7 system. I want to replace the MOST HU with a joying HU that has TOSLINK OUTPUT. It also has Coaxial output and a sub out as well. 3) Because I plan on doing away with the stock HU and MOST altogether, I want to power my system with a 8 channel Audison AF C8.14 DSP Amplifier. This amp is rated as 100w rms at 2ohm and 65w rms at 4ohm. The ampl is bridgeable. I would lose the center channel - but I’ve been told that isn’t too big of a deal. The amplifier has digital input for my joying to hook up to it. Another amp I am considering is the helix v eight mk2 which is 75w rms at 2ohm and also has optical input. Would I need any adapters or harnesses? Or would I be good to go because I am not using the factory HU? TIA |
Today, 01:06 PM | #2 |
Lieutenant General
2027
Rep 13,331
Posts |
The specs are actually published but may not be accurate.
Because they are at peak power and 10 percent distortion. See first three in the block of links also. Replacing speakers with drop in's is pretty easy on these. http://www.e90post.com/forums/showthread.php?t=1144129 In the above has the output chip specs somewhere in the thread . So for something like the underseat's the rms true power at 1 percent distortion is something like 55 . But 1 percent is still a pathetic output spec. (see entry 18) BMW stereo types http://www.e90post.com/forums/attach...4&d=1278871872 http://www.e90post.com/forums/showthread.php?t=352586 http://www.e90post.com/forums/attach...2&d=1266451970 http://www.e90post.com/forums/attach...2&d=1260829447 http://www.e90post.com/forums/showthread.php?t=641323 http://www.e90post.com/forums/attach...1&d=1209780605 http://technicpnp.com/menuDiagrams/d...e90_92_93.html http://www.e90post.com/forums/showthread.php?t=343673 http://bmwcoders.com/forum/3-er-8/bm...1-e92-e93-291/ http://www.musicarnw.com/page-2/ http://www.e90post.com/forums/attach...1&d=1209780865 http://www.e90post.com/forums/attach...3&d=1169133185 http://www.e90post.com/forums/showthread.php?t=138949 The only amp that actually works with the BMW Most Bus is as a drop in is made by Mobridge because the optical bus is a proprietary BMW Code. This is the only amp that directly reads the code. https://mobridge.us/products/ Technic Harness for Logic 7 retrofit will make life easier. Also you will have to program out the Most Bus(optical Bus) for at least the SOS function if you replace the head unit. Most Audio shops are not good with BMW's do not listen to what they say. You can get some real crappy results if you listen to what they say. Helix Audio Fisher products are good. Be sure to read the Audio build thread at the top of the stereo sub forum page. Seems you are randomly choosing stuff and hoping it works without much research so far. OPTICAL input may be overrated especially in the stuff you are choosing. Changing the Head Unit can be a can of worms and may not get you any better sound. When people put in aftermarket head units they usually run RCA's to the new amplifier and use something like a Technic Harness to adapt it to the old speaker wires. Or if they are keeping the BMW head unit they reprogram it for Analog output or buy a analog to Most Bus converter for the Logic 7 amp to get an Input. If you buy a DSP amp you have to be ready to tune it. https://musicarnw.com/ on the west coast and unexpected creations on the east coast are noted as the two premier BMW stereo shops in the US. Last edited by ctuna; Today at 01:52 PM.. |
Appreciate
0
|
Bookmarks |
|
|