[Justus]

Hi all, Ive been searching everywhere but can't seem to find if Im on right track.
My OBD (Thor/ MHD and others) connects to phone via Torque but continusly looses comms, Info pops up for a second then says lost over and over. Ive ordered a new Junction box thinking maybe its that.

Apparently to swap it out I need to code the new one?

Vehicle is a 09 335i E92.

Anyone had same issue?

Any help is greatly appreciated.

Don't have a dealer or mechanic for a few hundred kms away so rather limited.

[Justus]

Just to add that I do have JB4 installed and that's working fine for info but after that Ecu I assume is problem

[ctuna]

Is your battery healthy and do you have a stable alternator output in the proper voltage range?
You might want to vist the N54 N55 motor subforum where they talk about MHD .
And it wouldn't hurt to put this up in the general forum .
bmw boards and links
https://www.bimmerfest.com/forums/forumdisplay.php?f=99
https://www.e90post.com/forums/forumdisplay.php?f=27
https://www.e90post.com/forums/forumdisplay.php?f=2
https://www.e90post.com/forums/forumdisplay.php?f=122
https://www.e90post.com/forums/forumdisplay.php?f=368
https://bimmerretrofit.com/store/
https://www.e90post.com/forums/forumdisplay.php?f=197
https://www.e90post.com/forums/forumdisplay.php?f=378
https://www.e90post.com/forums/forumdisplay.php?f=16

[Justus]

Thanks I will have a look.