[dutch79]

Originally Posted by darkfires102

Interesting you are having stalling issues on 2.0.0 with noise reduction. I had the opposite and I always dealt eith stalls and bad running for the first starts after a flash or code clear before the beta maps. Now, the car starts up and is in a warm idle after like 2 seconds.

Well, it stalled the second day after I flashed that option. But the last 2 days it (cold) started fine, so it might also be better on my car. That would be great, because the cold start (even on a stock echaust) is pretty loud when you park just next to someone's bedroom and you leave early in the morning.

[dutch79]

Another question about datalogging:

Previously I was able to log timing corrections in the N55e app. But now I used the F+G app to flash v2.00 (Stage 2). In F+G there are only timing values available. Why is that?

So, for datalogging is it necessary to still use the N55e app?

[minulache]

I have the timing corrections in the F+G app

[dutch79]

Hmm. Also a E9x N55, right? Mine is 2012.
Well, then I just use the N55e app for logging.

[minulache]

Yeah, also an E9X N55, from 2011 mine. Are you sure in the settings that you have selected the timing corrections?

[dutch79]

They were not available in the F+G app. Only normal timing.