[Socket]

DIY - Replace E92 front seat belts

I'm doing a two tone upgrade of my E92 interior and will be documenting the process along the way

This DIY is for replacing the front seat belts on a E92... Once again, hope this helps someone out

[Socket]

[Socket]

[Socket]

[Socket]

[Socket]

bump

[ahhllen]

The two tone looks dope! where did you get the new seatbelt from? I've been looking for a set of red ones. All I could find was from IND and they are a bit too pricy..

[Socket]

Originally Posted by ahhllen

The two tone looks dope! where did you get the new seatbelt from? I've been looking for a set of red ones. All I could find was from IND and they are a bit too pricy..

Picked mine up from ebay, have not come across red ones though. Guessing these would be quite rare

[apnorrie]

@Socket, Can't thank you enough for these detailed instructions. Purchased a rebuilt 335xi and the driver's side seat belt was catching (or getting completely stuck) as well as failing to retract. After following your instructions I found the seat belt tensioner was installed at an angle and hence the belt was rubbing. You saved the day and the 3 hours estimated shop time. Many, many thanks for this !!!

[Socket]

Originally Posted by apnorrie

@Socket, Can't thank you enough for these detailed instructions. Purchased a rebuilt 335xi and the driver's side seat belt was catching (or getting completely stuck) as well as failing to retract. After following your instructions I found the seat belt tensioner was installed at an angle and hence the belt was rubbing. You saved the day and the 3 hours estimated shop time. Many, many thanks for this !!!

you are welcome

[-claw-]

I'm just about to do mine, thanks for your post.

[Socket]

Originally Posted by -claw-

I'm just about to do mine, thanks for your post.

No worries.... hope it helps

[Petercan1020]

Does anybody happen to know the size of the seat belts for the e92 BMW 2008