[CrackedatBMW]

hello i had the newest cic (C1A) in my car but it broke. now i have a CIC lying around but it has an older version than the cic (C1A) now i have already installed the older version of the CIC but now my navigation is gray and i cant click on it how can i turn this on? without an emulator?


thanks in advance

[kolopn]

You have to upgrade software to C1A, crack it, and then generate FSC codes to match your vin. There is no other way around. I was also looking for script activator but I didn’t find anything - with script activator maps updates are tricky. If you have any question, don’t hesitate.

[CrackedatBMW]

Originally Posted by kolopn

You have to upgrade software to C1A, crack it, and then generate FSC codes to match your vin. There is no other way around. I was also looking for script activator but I didn’t find anything - with script activator maps updates are tricky. If you have any question, don’t hesitate.

i have now the oem file special for my vin

now i can put the good fsc codes into my own car to activate my navigation

i only need to know the setps lke do i also need to store the sig cert and check sig cert

[kolopn]

As far as I remember there is tutorial on YouTube how to go step by step in fsctools. Link below:

FSCTools youtube tutorial

I used that and it’s working flawlessly.

[CrackedatBMW]

Originally Posted by kolopn

As far as I remember there is tutorial on YouTube how to go step by step in fsctools. Link below:

FSCTools youtube tutorial

I used that and it’s working flawlessly.

thanks i am gonna check is out

[RONAG2004]

The other option is with an Autel diagnostic machine, which updates you CIC, greetings

[ptpending]

if you had factory navigation, the you can try to get original FSCs from dealer or authorized electric and simply upload them to any CIC you have and get navi back