DIY: E9X ACC Retrofit

dumitru.o · 10-29-2024, 02:04 PM

Marv17 - i don t remember, i swapped everything that was missing on my board. follow also the lines from the LEDs, you might find other parts you are missing

Leucosticte · 11-18-2024, 08:45 AM

Has anyone else had issues adding the LDM to their car?

ACC shows up fine on the module tree, but the LDM is not showing up, I verified wakeup signal voltage and that it has power coming from my fuse tap. CAN wires are connected with PT-CAN high and PT-CAN low being connected properly. I'm using the terminal 15 wakeup signal for all modules but it seems like people have also had success using the dedicated ACC wakeup signal. I tried both and it still doesn't show up, not that I can see how it makes a difference swapping wakeup lines.
I ordered a new LDM to test with since they're cheap but I was wondering if these modules fail commonly or if there's something I did wrong here. Considering I wired up the radar properly I can't see how I did anything wrong here after checking 100x and I'm assuming I just got a dead module.

Leucosticte · 11-19-2024, 05:36 PM

Tried with a new LDM and my car still doesn't recognize it.
Does anyone else have any ideas?

dumitru.o · Yesterday, 01:52 PM

do you have the latest version of junction box? are you sure it s wired correctly? can and 15WUP?

just follow the diagrams, nothing else

Leucosticte · Yesterday, 09:32 PM

Quote:

Originally Posted by dumitru.o

do you have the latest version of junction box? are you sure it s wired correctly? can and 15WUP?

just follow the diagrams, nothing else

100% sure it's wired correctly. I used a CAN to USB adapter I had and I'm able to receive CAN data from my wiring.

What junction box rev do I need? I did try a junction box I had lying around from when I was building a test bench but I had no success with it. The junction box was from May 2007 and my car was built in September 2006.

dumitru.o · Today, 12:37 AM

That is old , you don t have the proper junction box

Leucosticte · Today, 01:39 AM

Do you know which one I need then? RealOEM only says that junction boxes up to 09/2007 are compatible with my car. So it seems like if I get one later than that then I'll have to start rewiring things.

It does not make sense to me that you could order a 2006 E90 with ACC but my JBE does not support it despite being newer.

10-29-2024, 02:04 PM	#573
dumitru.o coding BMW..... 536 Rep 1,003 Posts Drives: BMW Join Date: Jun 2013 Location: the land of Dracula iTrader: (0)	Marv17 - i don t remember, i swapped everything that was missing on my board. follow also the lines from the LEDs, you might find other parts you are missing
	Appreciate 0 Quote

11-18-2024, 08:45 AM	#574
Leucosticte Lieutenant 322 Rep 449 Posts Drives: 2007 BMW 328xi E92 6mt swap Join Date: Oct 2019 Location: New Jersey iTrader: (0) Garage List 2007 BMW 328xi [0.00]	Has anyone else had issues adding the LDM to their car? ACC shows up fine on the module tree, but the LDM is not showing up, I verified wakeup signal voltage and that it has power coming from my fuse tap. CAN wires are connected with PT-CAN high and PT-CAN low being connected properly. I'm using the terminal 15 wakeup signal for all modules but it seems like people have also had success using the dedicated ACC wakeup signal. I tried both and it still doesn't show up, not that I can see how it makes a difference swapping wakeup lines. I ordered a new LDM to test with since they're cheap but I was wondering if these modules fail commonly or if there's something I did wrong here. Considering I wired up the radar properly I can't see how I did anything wrong here after checking 100x and I'm assuming I just got a dead module.
	Appreciate 0 Quote

11-19-2024, 05:36 PM	#575
Leucosticte Lieutenant 322 Rep 449 Posts Drives: 2007 BMW 328xi E92 6mt swap Join Date: Oct 2019 Location: New Jersey iTrader: (0) Garage List 2007 BMW 328xi [0.00]	Tried with a new LDM and my car still doesn't recognize it. Does anyone else have any ideas?
	Appreciate 0 Quote

Yesterday, 01:52 PM	#576
dumitru.o coding BMW..... 536 Rep 1,003 Posts Drives: BMW Join Date: Jun 2013 Location: the land of Dracula iTrader: (0)	do you have the latest version of junction box? are you sure it s wired correctly? can and 15WUP? just follow the diagrams, nothing else
	Appreciate 0 Quote

Today, 12:37 AM	#578
dumitru.o coding BMW..... 536 Rep 1,003 Posts Drives: BMW Join Date: Jun 2013 Location: the land of Dracula iTrader: (0)	That is old , you don t have the proper junction box
	Appreciate 0 Quote

Today, 01:39 AM	#579
Leucosticte Lieutenant 322 Rep 449 Posts Drives: 2007 BMW 328xi E92 6mt swap Join Date: Oct 2019 Location: New Jersey iTrader: (0) Garage List 2007 BMW 328xi [0.00]	Do you know which one I need then? RealOEM only says that junction boxes up to 09/2007 are compatible with my car. So it seems like if I get one later than that then I'll have to start rewiring things. It does not make sense to me that you could order a 2006 E90 with ACC but my JBE does not support it despite being newer.
	Appreciate 0 Quote