Heated Seat Retrofit

dj_aivan · 01-17-2020, 02:13 PM

Quote:

Originally Posted by ptpending

you should not only add heated seat option to VO but to code modules using that VO, IHKA,JBE,SMFA

Please provide instructions on how to encode the passenger seat. Driver's Affairs. What is the code that needs to be added to the VO. I have D-Kan cable and inpa with NCS Expert. I've linked everything to the schematics, but I don't know how to code them. Again, I ask for a detailed instruction

ptpending · 01-19-2020, 06:30 AM

Quote:

Originally Posted by dj_aivan

Please provide instructions on how to encode the passenger seat. Driver's Affairs. What is the code that needs to be added to the VO. I have D-Kan cable and inpa with NCS Expert. I've linked everything to the schematics, but I don't know how to code them. Again, I ask for a detailed instruction

this problem was discussed on that forum many times
please dig "coding" section of the forum to learn to to code options and after that dig seat retrofit/upgrades topics on info how to upgrade seats

ShocknAwe · 04-15-2020, 02:01 PM

Found some E92 manual seats I want to retrofit to my LCI E82 with power/heated seats. From what I understand it should be plug and play.

But, the seller doesn't know if they're heated. Is there a way I can find this out? I'm assuming they don't have the car otherwise we could just check the dash for heat buttons.

Nickdot · 05-30-2022, 06:45 AM

Just to dig this thread up from the depths...

Could anyone potentially shed some light on the following that I haven't seen covered?

Upgrading from LCI Manual Sport Seats, to LCI Partial Electric Sport Seats with Heat.
There is no need for K_CAN, so I have run an additional power, ground, PWM signal to the JBE and the additional small gauge wire into the fusebox at X11001 position 10 - to each seat.

So my car-loom looks like so;

However, when the new seats arrived, there is a pin in pin 9 on both seat connectors - something my car-side loom does not have.
The seat connector looks like so;

I'm going to run this in properly, back to the fusebox - but does anyone know what fuses I'm needing to plumb in?
I have added fuses in 45/46 for what I believe is the seat heating modules (no seat modules on these seats).

I cannot find any information about this - most retrofits need the car-side connector re-pinning from 9 to 4, not an additional in 9.
Ideally I don't want to use tap connectors, I'm going to wire it in to the fusebox, as the car will be in pieces anyway.

Any advice would be great

Montelonio · 11-26-2024, 12:45 AM

Sorry if I repeat the question. I have e91 318d 2007 (non LCI) which originally has base mechanical non heated cloth seats. Now I bought mechanical leather heated sport seats and I need to retrofit heating function. Maybe anyone has photos or info which wiring I need to add? I not have understanding at diagrams, so the photos or video what actually need to do would be the best way. Thank you in advance.

04-15-2020, 02:01 PM	#267
ShocknAwe 1Addict 3712 Rep 8,232 Posts Drives: E82 1er, M57 X5, 964 C4 Join Date: Jul 2012 Location: Charleston iTrader: (22)	Found some E92 manual seats I want to retrofit to my LCI E82 with power/heated seats. From what I understand it should be plug and play. But, the seller doesn't know if they're heated. Is there a way I can find this out? I'm assuming they don't have the car otherwise we could just check the dash for heat buttons. __________________ 2010 E82 1 Series M Clone Hydra Performance augmented OEM+
	Appreciate 0 Quote

05-30-2022, 06:45 AM	#268
Nickdot Private 28 Rep 81 Posts Drives: E90 335d & Megane 225 Trophy Join Date: Jan 2020 Location: Dorset, UK iTrader: (0)	Just to dig this thread up from the depths... Could anyone potentially shed some light on the following that I haven't seen covered? Upgrading from LCI Manual Sport Seats, to LCI Partial Electric Sport Seats with Heat. There is no need for K_CAN, so I have run an additional power, ground, PWM signal to the JBE and the additional small gauge wire into the fusebox at X11001 position 10 - to each seat. So my car-loom looks like so; However, when the new seats arrived, there is a pin in pin 9 on both seat connectors - something my car-side loom does not have. The seat connector looks like so; I'm going to run this in properly, back to the fusebox - but does anyone know what fuses I'm needing to plumb in? I have added fuses in 45/46 for what I believe is the seat heating modules (no seat modules on these seats). I cannot find any information about this - most retrofits need the car-side connector re-pinning from 9 to 4, not an additional in 9. Ideally I don't want to use tap connectors, I'm going to wire it in to the fusebox, as the car will be in pieces anyway. Any advice would be great
	Appreciate 0 Quote

11-26-2024, 12:45 AM	#269
Montelonio Registered 0 Rep 4 Posts Drives: BMW E91 318d ‘07 Join Date: Nov 2024 Location: Europe iTrader: (0)	Sorry if I repeat the question. I have e91 318d 2007 (non LCI) which originally has base mechanical non heated cloth seats. Now I bought mechanical leather heated sport seats and I need to retrofit heating function. Maybe anyone has photos or info which wiring I need to add? I not have understanding at diagrams, so the photos or video what actually need to do would be the best way. Thank you in advance.
	Appreciate 0 Quote