E90Post
 


Extreme Powerhouse
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > misfire/fueling? issue



Reply
 
Thread Tools Search this Thread
      12-02-2024, 04:02 PM   #1
SourClips718
Registered
0
Rep
1
Posts

Drives: 2010 335i
Join Date: Dec 2024
Location: New Jersey

iTrader: (0)

misfire/fueling? issue

Hey guys, new member here! first off, im very happy to be a part of this awesome community, so what better way to become familiar with you guys than by purchasing a used n54
anyway, at cold starts i am misfiring and having a bit of shaking/erratic idle. after about 10 seconds of the engine running the rpm's shoot up to about 2k and it throws misfire codes on either cyl 1, other times its on 2 and 3. i also get a 2DED code (power management, closed circuit current violation) along with a shadow 2AAF code (fuel pump plausibility)
the car idles perfectly fine and still pulls hard when i clear the codes and let it get up to temp, although sometimes at WOT i do get limp mode (no half engine illumination, but the car only reads 4 lbs of boost in mhd) at idle the rail pressure sits around 700 and the low pressure sensor reads 50-60.
I have already done the coils, plugs, and a walnut blast. There was zero fuel smell or moisture on the plugs, so i dont think its leaking injectors. the car is only stage 1, with intakes, charge pipe/bov. 115k. any help is much appreciated!
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:18 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST