E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > AUDIO/VIDEO + BLUETOOTH + Electronics/Alarm/Software > Cable can hi can lo help



Reply
 
Thread Tools Search this Thread
      01-17-2025, 10:35 AM   #1
warlockuy
Private First Class
34
Rep
113
Posts

Drives: 320i n46 :(
Join Date: Jun 2023
Location: Mvd

iTrader: (0)

Garage List
Cable can hi can lo help

Hi, I'm about to connect the rear PDCs retrofit. The question is, can I take the CAN and CAN hi cables from any side where the cables of that color are visible? Or is it necessary to be from the fuse box harness? The harness that goes to the back of my E90 has both cables of the same color. Is that possible?

The cable has to be identical or similar, is that ok? Solid or braided like the original?

E90 lci 328xi 2009

Last edited by warlockuy; 01-17-2025 at 10:36 AM..
Appreciate 0
      01-17-2025, 11:06 AM   #2
opjose
Major
opjose's Avatar
245
Rep
1,376
Posts

Drives: 335xi
Join Date: May 2016
Location: Md

iTrader: (0)

Can bus is exactly that, a digital communications bus shared by all connected devices.

It doesn’t matter where in the bus a new device is plugged in (excepting termination but that is a separate issue).

So yes it does not matter which side the device is plugged into.

I found the Can bus to be very sensitive to resistance loads and even solder impedance changes, so make sure you use identical wire and have very secure and good connections. Don’t accidentally cross connect the high and low sides anywhere too.
Appreciate 0
      01-17-2025, 11:12 AM   #3
warlockuy
Private First Class
34
Rep
113
Posts

Drives: 320i n46 :(
Join Date: Jun 2023
Location: Mvd

iTrader: (0)

Garage List
Quote:
Originally Posted by opjose View Post
Can bus is exactly that, a digital communications bus shared by all connected devices.

It doesn’t matter where in the bus a new device is plugged in (excepting termination but that is a separate issue).

So yes it does not matter which side the device is plugged into.

I found the Can bus to be very sensitive to resistance loads and even solder impedance changes, so make sure you use identical wire and have very secure and good connections. Don’t accidentally cross connect the high and low sides anywhere too.
Thank you very much, I bought the same cable but only a different color, I will try to install it over the weekend

Thanks
Appreciate 0
      01-17-2025, 01:57 PM   #4
opjose
Major
opjose's Avatar
245
Rep
1,376
Posts

Drives: 335xi
Join Date: May 2016
Location: Md

iTrader: (0)

If you absolutely MUST use different color cables use a wire label on both ends of each cable to identify it.

Your future self or buyer will thank you for that.

Last edited by opjose; 01-17-2025 at 01:57 PM..
Appreciate 0
      01-25-2025, 07:06 AM   #5
warlockuy
Private First Class
34
Rep
113
Posts

Drives: 320i n46 :(
Join Date: Jun 2023
Location: Mvd

iTrader: (0)

Garage List
Quote:
Originally Posted by opjose View Post
If you absolutely MUST use different color cables use a wire label on both ends of each cable to identify it.

Your future self or buyer will thank you for that.
Thank you very much, it works perfectly. I already have parking sensors. Thank you.
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:33 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST