[RedErik]

Originally Posted by vitalic

Having a little progress on my Android project so far.
Audio panel on LIN now translate signals to CAN2.

Next steps:
retrofit to E series (adjust wake-up logic, dimming lights, etc)
diagnostic messages
Ultrasonic parking sensors (PDC)

Sorry for digging out the old post, but did you ever figured out how to trigger PDC (and perhaps a camera) on bench setup?

[Trickd122]

Originally Posted by vilord

Mostly worked on my CIC with Nick, which is now done, making my 2010 ready for sale (thanks!).

Connected my atm to the evo and the zgw.
Checked for errors in ista, and found quite a few, including all of the antennas (no surprise, since none are connected) and also the ethernet link was showing down.
The SIM status, however was 'logged in' or something along those lines... so it is talking to the lte network at least.

double checked my connections and found i'd misread my pinout by one, adjusted the missed ethernet pin, and the ethernet error went away.

nothing different shows up in connected drive, though, and sending a code from the bmw site to the nbt doesn't do anything.

guess i'll try installing it in the car later this week, connect it to the emulator, etc.

i'm hoping i don't have to find yet another ATM from an ID5/6 car, instead of one from an ID4 car...

Are you able to share the pinout you used?