![]() |
![]() |
![]() |
![]() |
![]() ![]() |
![]() |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
Can you adjust the preload on KW v2?
![]() |
![]() |
09-02-2008, 11:59 PM | #1 |
ig: jeffersonho
![]() 158
Rep 2,187
Posts |
Can you adjust the preload on KW v2?
Im wondering if you can adjust the preload to stiffen up on the kw v2 shocks?
Or I can only go as far as adjusting the knobs with the allen key on the top of the shocks in the front and rear.... I know on the Tein Flex and JDM coilovers, you can set the preload more, so it is stiffer at the price of the life of the coilovers...
__________________
|
09-03-2008, 10:15 PM | #2 |
Lieutenant Colonel
![]() 100
Rep 1,659
Posts |
i believe with a traditional coilover the more you lower the car the more you are increasing the preload... there are very few coilover setups - i believe the only one for the e90/e92 is the hks - that you adjust height and "preload" separately...but this allows you to retain suspension travel while adjusting the vehicle ride height.
|
Appreciate
0
|
![]() |
Bookmarks |
|
|