DIY Brex White Ring

zzinco79 · 03-27-2006, 10:15 PM

I get this from somewhere in this forum.

It was Japanese.

Before install!!! Disconnect your negative teminal to your battery.

1. Lift your car up.
2. Take your wheels out.
3. Unscrew some screws and nuts. (see pics)
4. Unscrew 2 screws on your ring bulbs.
5. Replace them.
6. Put everything back.
7. Done!!

So, enjoy!!

younghov85 · 03-27-2006, 10:22 PM

Is it necessary to take off the wheel, im asking bc one thread for changing the fod lights said to unscrew 7 screws and i did it by taking off only 3

zzinco79 · 03-27-2006, 10:24 PM

Quote:

Originally Posted by younghov85

Is it necessary to take off the wheel, im asking bc one thread for changing the fod lights said to unscrew 7 screws and i did it by taking off only 3

Than tell us how...

longtran · 03-27-2006, 10:29 PM

Quote:

Originally Posted by younghov85

Is it necessary to take off the wheel, im asking bc one thread for changing the fod lights said to unscrew 7 screws and i did it by taking off only 3

ahhaha it only took me 2 screw to put the foglights in. i did it today..

younghov85 · 03-27-2006, 10:31 PM

right by the wheel right. just unscrew and pull the plastic back

just4kickz · 06-13-2006, 11:54 PM

so wait u can do this w/o taking off the wheel + jacking? jw... cause i'm considering on rings if i can do it without the jack... thnx!

AW330i · 06-21-2006, 12:04 AM

the brex can not be done without removing the fender well plastic cover I suppose it might be possible to do without taking off the wheel but you will not be able to get any clearance to where you need to be and the brex are pretty deep down in there.. In this case it really works out a lot faster to just take the wheels off...

03-27-2006, 10:15 PM	#1
zzinco79 Major 136 Rep 1,411 Posts Drives: 2006 BMW 325i Join Date: Nov 2005 Location: Rochester, NY iTrader: (8)	DIY Brex White Ring I get this from somewhere in this forum. It was Japanese. Before install!!! Disconnect your negative teminal to your battery. 1. Lift your car up. 2. Take your wheels out. 3. Unscrew some screws and nuts. (see pics) 4. Unscrew 2 screws on your ring bulbs. 5. Replace them. 6. Put everything back. 7. Done!! So, enjoy!! Attached Images
	Appreciate 0 Tweet Quote

03-27-2006, 10:22 PM	#2
younghov85 Captain 70 Rep 889 Posts Drives: 2006 E90 black 325 Join Date: Aug 2005 Location: Lanham, Maryland iTrader: (0)	Is it necessary to take off the wheel, im asking bc one thread for changing the fod lights said to unscrew 7 screws and i did it by taking off only 3
	Appreciate 0 Quote

03-27-2006, 10:31 PM	#5
younghov85 Captain 70 Rep 889 Posts Drives: 2006 E90 black 325 Join Date: Aug 2005 Location: Lanham, Maryland iTrader: (0)	right by the wheel right. just unscrew and pull the plastic back
	Appreciate 0 Quote

06-13-2006, 11:54 PM	#6
just4kickz boku no namae ha... 349 Rep 11,023 Posts Drives: 2006 BS 330i Join Date: Feb 2006 Location: S. Bay Area, CA + Newark, NJ + ChiCity + True Blue iTrader: (11) Garage List 2006 E90 330i [0.00]	so wait u can do this w/o taking off the wheel + jacking? jw... cause i'm considering on rings if i can do it without the jack... thnx!
	Appreciate 0 Quote

06-21-2006, 12:04 AM	#7
AW330i Captain 87 Rep 876 Posts Drives: Alpine White 330i Join Date: Jun 2005 Location: Houston, Tx iTrader: (0)	the brex can not be done without removing the fender well plastic cover I suppose it might be possible to do without taking off the wheel but you will not be able to get any clearance to where you need to be and the brex are pretty deep down in there.. In this case it really works out a lot faster to just take the wheels off... __________________
	Appreciate 0 Quote