|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
noise on wire tap
|
|
01-18-2009, 05:27 AM | #1 |
Private
2
Rep 71
Posts |
noise on wire tap
hi all,
so after spending a acouple of hours installing my ampilfier i have loud sound and decent mid bass and acceptable sub bass , unfortunately my low pass is 75hz ( not adjustable ) so i have to run full range to the subs or i lose a lot of frequencies. i tapped the rear speaker lines and totally pathetic bass, so i decided to tap the inputs at the front harness where the sub and front door connections are, and boom everthing came alive , MUCH BETTER TO TAP THE HARNESS AT THE FRONT DOORS FOR INPUTS in my car anyway ( profesional radio with standard sound ) these are connected to and loc in boot which is grounded. the amp is connected to the battery with the negative to the chassis where the battery is held down (not on the battery negative ) my problem is noise on the speakers when no sound is playing kinda electrical ? any ideas on how to fix this or what this is? yunus infinity ref coaxials in doors and shelf standard subs under seats sounstream granite 120.4 amp audiopipe loc |
01-19-2009, 04:09 AM | #3 |
Member
36
Rep 261
Posts |
Hi Yunus,
Has the aftermarket amp made a significant difference to the underseat subs? Also are the infinity coax's just a direct replacement, or have to amplified them? |
Appreciate
0
|
01-19-2009, 04:14 AM | #4 |
Private
2
Rep 71
Posts |
hi menno
i have amplified the stock subs , major difference in output they hit harder and louder , i will NOT be doing the sws8 upgrade. the infinity's front and rear are ampified as well , make a difference to loudness only, i might still change those to splits as well, because i do believe location can make a huge difference to soundstaging. but for now..... i am happy |
Appreciate
0
|
Bookmarks |
|
|