Help with Procede Map Switching

murph-54 · 02-18-2009, 08:24 PM

Help. I just installed the map switching device on my Procede V3 by plugging it into the 3-prong connector, which I assume is all you need to do. Is that right? I opened up my Procede Reader and the Procede is online, but the heading called "Map Switching Options" is dimmed out and won't open. I assume this is where I would set the default to valet. Am I doing something wrong? Is there something else I am supposed to do? Thanks.

**335i** · 02-19-2009, 03:39 AM

as i understand vishnu team programed your rev II when u ordered it, so what is a problem, or you want to make your own settings

Sparky66 · 02-19-2009, 11:05 AM

Are you using the latest software????

http://www.vishnutuningforum.com/for...read.php?t=990

In the current Procede Reader software there is no "Map Switching Options" heading.

You need to go into 'User Maps' and then access the 'User Adjustable Parameters'.

In there you can turn Valet Mode on or off. With the Valet set to on, your car defaults to Valet at engine start up and then to access the maps you will need to first press the 'On' button on your remote to take it out of Valet. Switching maps between Map 1 and 2 is achieved via the remote button by toggling the 'On' and 'Off' button.

With the Valet setting turned to Off the car will start up in the 'Map Mode', which you can choose to be either Map 1 or 2 by setting it up in the 'User Adjustable Parameters' screen. Again, switching maps between Map 1 and 2 is achieved via the remote button by toggling the 'On' and 'Off' button.

cn555ic · 02-19-2009, 11:07 AM

change maps using the remote keyfob...can't change individual maps via Procede Reader, but with Procede reader u can stage the stage of the maps...I think OP you getting confused!

munters · 02-19-2009, 11:16 AM

Quote:

Originally Posted by murph-54

Help. I just installed the map switching device on my Procede V3 by plugging it into the 3-prong connector, which I assume is all you need to do. Is that right? I opened up my Procede Reader and the Procede is online, but the heading called "Map Switching Options" is dimmed out and won't open. I assume this is where I would set the default to valet. Am I doing something wrong? Is there something else I am supposed to do? Thanks.

No, you need to go on User Maps an then user adjustable parameters

Dustin Bramell · 02-19-2009, 12:41 PM

I just talked with Murph, his confusion came into play with the software version. He was still using the 2.0 software, which did not yet have the User Adjustable Perimeters. But, you guys were spot on with your instructions for the 3.1 reader.

murph-54 · 02-19-2009, 05:10 PM

Thanks Everyone. All is well.

02-18-2009, 08:24 PM	#1
murph-54 Private 9 Rep 83 Posts Drives: 2007 335i TS Coupe 6MT Join Date: Apr 2007 Location: Portland, Oregon iTrader: (0)	Help with Procede Map Switching Help. I just installed the map switching device on my Procede V3 by plugging it into the 3-prong connector, which I assume is all you need to do. Is that right? I opened up my Procede Reader and the Procede is online, but the heading called "Map Switching Options" is dimmed out and won't open. I assume this is where I would set the default to valet. Am I doing something wrong? Is there something else I am supposed to do? Thanks.
	Appreciate 0 Tweet Quote

02-19-2009, 03:39 AM	#2
335i Colonel 191 Rep 2,320 Posts Drives: TOYOTA & 2008 E92 335i 6MT Join Date: Jul 2007 Location: Swiss iTrader: (4) Garage List 2008 335i [9.00]	as i understand vishnu team programed your rev II when u ordered it, so what is a problem, or you want to make your own settings __________________ E92 335i Black Saphire 6MT PROcede V5, BMS DCI, Big Tom IC, AR CL-DP's 3", AR Design OC, Forge DV's, OEM M3 side skirts, BMW Performance Wheels 19 inch 269 Black Gloss+Continental ContiSportContact 5P (400hp and 550nm) https://www.youtube.com/user/aistis7..._as=subscriber
	Appreciate 0 Quote

02-19-2009, 11:05 AM	#3
Sparky66 Major 61 Rep 1,230 Posts Drives: 335 E92 Coupe. Jet Black. Join Date: Feb 2007 Location: Sydney, Australia iTrader: (0)	Are you using the latest software???? http://www.vishnutuningforum.com/for...read.php?t=990 In the current Procede Reader software there is no "Map Switching Options" heading. You need to go into 'User Maps' and then access the 'User Adjustable Parameters'. In there you can turn Valet Mode on or off. With the Valet set to on, your car defaults to Valet at engine start up and then to access the maps you will need to first press the 'On' button on your remote to take it out of Valet. Switching maps between Map 1 and 2 is achieved via the remote button by toggling the 'On' and 'Off' button. With the Valet setting turned to Off the car will start up in the 'Map Mode', which you can choose to be either Map 1 or 2 by setting it up in the 'User Adjustable Parameters' screen. Again, switching maps between Map 1 and 2 is achieved via the remote button by toggling the 'On' and 'Off' button. Last edited by Sparky66; 02-19-2009 at 11:29 AM..
	Appreciate 0 Quote

02-19-2009, 11:07 AM	#4
cn555ic 485 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	change maps using the remote keyfob...can't change individual maps via Procede Reader, but with Procede reader u can stage the stage of the maps...I think OP you getting confused!
	Appreciate 0 Quote

02-19-2009, 12:41 PM	#6
Dustin Bramell Lieutenant 46 Rep 428 Posts Drives: e90 335i, 125cc Trackmagic Join Date: Sep 2006 Location: Santa Monica, CA iTrader: (1)	I just talked with Murph, his confusion came into play with the software version. He was still using the 2.0 software, which did not yet have the User Adjustable Perimeters. But, you guys were spot on with your instructions for the 3.1 reader.
	Appreciate 0 Quote

02-19-2009, 05:10 PM	#7
murph-54 Private 9 Rep 83 Posts Drives: 2007 335i TS Coupe 6MT Join Date: Apr 2007 Location: Portland, Oregon iTrader: (0)	Thanks Everyone. All is well.
	Appreciate 0 Quote