[MNR0]

Hi all,

Anyone ever dyno their 335?

Mine pulled 188rwkw bone stock on a DD in Shootout mode.

List your mods too...

[WOPALX]

Mine did 234rwkw on Proceed V1.47 18mths~2 years ago, otherwise stock. Another 335 E92 did 232rwkw same day, same dyno same tune, same mods.

Will re-dyno in a few months when the DP's, intake etc are installed and the stupid hot weather cools down to see how V3 stacks up.

Dastrix (135) i think did 240ish at the same place I did mine, JB3 so some difference in tune technology

[OZMOD335i]

246kw at the rears. Exede and exhaust. At Chiptorque on the Gold Coast.

[MNR0]

To follow up on real world track results, the totally stock meagre 188rwkw managed this at Heathcote yesterday (full weight, no tyre pressure drop)

13.47@103.14 2.00 60'
13.56@105.93 2.16 60'

The second run resulted in a LOT of wheelspin off the line but the best trap speed

I was surprised that this car stock is as competitive as a tuned and lightly modded LS1/LS2

[WOPALX]

Originally Posted by MNR0

To follow up on real world track results, the totally stock meagre 188rwkw managed this at Heathcote yesterday (full weight, no tyre pressure drop)

13.47@103.14 2.00 60'
13.56@105.93 2.16 60'

The second run resulted in a LOT of wheelspin off the line but the best trap speed

I was surprised that this car stock is as competitive as a tuned and lightly modded LS1/LS2

Would have thought your 60' times would be better How is your LS running?

[MNR0]

Originally Posted by WOPALX

Would have thought your 60' times would be better How is your LS running?

The track was slippery off the line. I would have had to turn traction control on to reduce wheelspin - that would have sucked and not helped the 60'

Running track tyres would have helped out a lot but hey, its a stock car so...

As for LS, looks like it's going in 2 stages. Getting an LS3 first to test all components work/run-in. Next year its the real deal.

[MFKN3]

261rwkw, procede 1.47 and exhaust.

[QUM01Z]

Originally Posted by OZMOD335i

246kw at the rears. Exede and exhaust. At Chiptorque on the Gold Coast.

Hey Mate, Can i ask what the Excede Chip and Exhaust set you back from Chiptorque? Also is the exhaust annoyingly loud?

[OZMOD335i]

Originally Posted by QUM01Z

Hey Mate, Can i ask what the Excede Chip and Exhaust set you back from Chiptorque? Also is the exhaust annoyingly loud?

The exhaust I got from Taipan exhausts at Burleigh on the Gold Coast. It's not too loud especially since the standard 335i is a fairly quiet car (compared with an e46 M3). I think it sounds great and the drone is pretty good. Certainly doesn't sound like a Rex or anything. I paid $3,500 for the exhaust which I think is very expensive but that was 2 years ago. There's probably a lot of good aftermarket exhausts around for much cheaper or ordering online. Just do your research first.

I can't remember how much the Exede was as a lot of mods I did I paid in cash so my wife didn't find out and cut off the Crown jewels. I think maybe $1-$1.5k.