What the outer diameter of the BMW plug socket?

M3to335 · 03-31-2009, 12:58 PM

I was going to grab a thin-walled socked from someone at work but wanted to know what the OD was before I just "guessed".

Can someone get a quick measurment with the micrometers?

Thanks!

WOPALX · 03-31-2009, 04:26 PM

Quote:

Originally Posted by M3to335

I was going to grab a thin-walled socked from someone at work but wanted to know what the OD was before I just "guessed".

Can someone get a quick measurment with the micrometers?

Thanks!

Pretty sure you need to buy the BMW socket, not expensive from tishner.

cstmx_ryder · 03-31-2009, 08:34 PM

^Don't get it from Tischer, that's where I got it from and it cost me 60 bucks.

OP, go to the link for the post I included in one of the replies, scroll to what lawdude had to say, he found a place online that sells it for under 30 bucks. You should check it out.......

GL

scalbert · 03-31-2009, 08:41 PM

I don't have a caliper handy but a quick check looks like 17.5 mm OD. Remember, it is 12 point.

M3to335 · 03-31-2009, 08:50 PM

Cool, thanks.

David 12 · 03-31-2009, 08:57 PM

See below post!

David 12 · 03-31-2009, 08:58 PM

found the socket for even less (not much less but it's still cheaper) http://www.sjdiscounttools.com/asssp1412.html

lawdude · 03-31-2009, 09:02 PM

Quote:

Originally Posted by David 12

found the socket for even less (not much less but it's still cheaper) http://www.sjdiscounttools.com/asssp1412.html

The site says there is a $3.50 handling charge on top of shipping charge for orders under $50.

David 12 · 03-31-2009, 09:09 PM

I didn't look too closely - I just copied and pasted this post from Mayno ... still pretty cheap though!

Hit_Apex · 03-31-2009, 09:28 PM

Mics at .705" (~17.9mm)

Sniz · 03-31-2009, 09:32 PM

crap I'll sell you mine.....i dont have a 335 anymore so its not doin me much good.

matutino · 03-31-2009, 10:17 PM

Quote:

Originally Posted by Sniz

crap I'll sell you mine.....i dont have a 335 anymore so its not doin me much good.

You need a FI car ASAP!

Sniz · 03-31-2009, 10:51 PM

Quote:

Originally Posted by matutino

You need a FI car ASAP!

whats up man, I think I got one

matutino · 04-01-2009, 12:23 AM

Quote:

Originally Posted by Sniz

whats up man, I think I got one

Nice! TT stage II? if so, then you are going to love it!

Sniz · 04-01-2009, 12:32 AM

Quote:

Originally Posted by matutino

Nice! TT stage II? if so, then you are going to love it!

yup.....

I think a GT35r and meth kit are in order too

matutino · 04-01-2009, 10:37 AM

Quote:

Originally Posted by Sniz

yup.....

I think a GT35r and meth kit are in order too

ohhhh man! GT35r would be nice!

03-31-2009, 12:58 PM	#1
M3to335 Whats that smell? 149 Rep 1,790 Posts Drives: Bimmers, duh Join Date: Nov 2006 Location: NC iTrader: (6)	What the outer diameter of the BMW plug socket? I was going to grab a thin-walled socked from someone at work but wanted to know what the OD was before I just "guessed". Can someone get a quick measurment with the micrometers? Thanks!
	Appreciate 0 Tweet Quote

03-31-2009, 08:34 PM	#3
cstmx_ryder Colonel 171 Rep 2,875 Posts Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR iTrader: (2)	^Don't get it from Tischer, that's where I got it from and it cost me 60 bucks. OP, go to the link for the post I included in one of the replies, scroll to what lawdude had to say, he found a place online that sells it for under 30 bucks. You should check it out....... GL __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10
	Appreciate 0 Quote

03-31-2009, 08:41 PM	#4
scalbert Major General 158 Rep 5,776 Posts Drives: '13 S4, '15 Q7 Join Date: Feb 2007 Location: Woodstock, GA iTrader: (8)	I don't have a caliper handy but a quick check looks like 17.5 mm OD. Remember, it is 12 point.
	Appreciate 0 Quote

03-31-2009, 08:50 PM	#5
M3to335 Whats that smell? 149 Rep 1,790 Posts Drives: Bimmers, duh Join Date: Nov 2006 Location: NC iTrader: (6)	Cool, thanks.
	Appreciate 0 Quote

03-31-2009, 08:57 PM	#6
David 12 Major 115 Rep 1,048 Posts Drives: 2019 BMW X5 50i BSM, M Sport Join Date: Jan 2007 Location: Omaha iTrader: (0)	See below post!
	Appreciate 0 Quote

03-31-2009, 08:58 PM	#7
David 12 Major 115 Rep 1,048 Posts Drives: 2019 BMW X5 50i BSM, M Sport Join Date: Jan 2007 Location: Omaha iTrader: (0)	found the socket for even less (not much less but it's still cheaper) http://www.sjdiscounttools.com/asssp1412.html
	Appreciate 0 Quote

03-31-2009, 09:09 PM	#9
David 12 Major 115 Rep 1,048 Posts Drives: 2019 BMW X5 50i BSM, M Sport Join Date: Jan 2007 Location: Omaha iTrader: (0)	I didn't look too closely - I just copied and pasted this post from Mayno ... still pretty cheap though!
	Appreciate 0 Quote

03-31-2009, 09:28 PM	#10
Hit_Apex Riding the knock sensor 3055 Rep 1,972 Posts Drives: 21 X5MC \| 23 M4CSL Join Date: May 2008 Location: PCH iTrader: (1) Garage List 2021 BMW X5MC [10.00]	Mics at .705" (~17.9mm) __________________
	Appreciate 0 Quote

03-31-2009, 09:32 PM	#11
Sniz Lieutenant General 680 Rep 10,584 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	crap I'll sell you mine.....i dont have a 335 anymore so its not doin me much good. __________________
	Appreciate 0 Quote