procede rev2 un-opened

RiXst3r · 06-05-2009, 09:34 AM

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

i have an un-opened PROcede v3 rev2 that (as a nice guesture) I personally bought back from a customer that sold his car before installing the unit.

I originally was going to use this unit on a 135i we were looking at, but we ended up not getting the car... since I can't run 2 procedes on my 335i, I need to sell this one

It includes all original parts sealed in their baggies. You will need to purchase the $15 canbus update if you want to make this the same as the newest units (http://www.e90post.com/forums/showthread.php?t=249395)

I am selling this here because I personally own this unit, and whoever purchases it will need to update it to the newest maps (free downloads). This is not "new" , but it is unopened and never been installed.

SOLD.

-Rick

RiXst3r · 06-07-2009, 03:51 PM

I need to sell this, its un-opened, never been installed... I am willing to take offers/trades/etc...

This is one hell of a deal, and you can buy with confidence since I am a vendor.

Jonny550 · 06-07-2009, 05:02 PM

is the v3 rev 2 the competitor for the jb2 or is it like a version 2 of the of the version 3

just asking.

scottp999 · 06-07-2009, 05:22 PM

Version 2 of the procede hardware (the latest version), commonly called REV II. Latest software for that verision is 3.3 maps dated 5/29/2009. So it's a REVII procede that runs the V3 maps.

Looks like the harness is not canbus activated, but the wires are cheap and it's a quick update to the harness.

Normal e90 price is $945. Rick's offereing for $750, plus you will need the $15 wire update = $765.

The only way to get one cheaper is if you are an existing procede customer that originally ordered an older unit from Vishnu.

Translation is that it's a good deal for someone buying their first Vishnu product.

As far as competition, it's main hardware competitor is JB3 PNP.

to_riffic · 06-07-2009, 07:45 PM

new or not, its the same ish, cuz in the end the unit is goin in the ecu box, and it wont change the status of the unit itself unless somethin was broken on the unit.

i realize u're a vendor but 750/765 is still high for "market value" i've seen this go for as low as 600 shipped, just fyi...

lpphreakx06 · 06-07-2009, 07:51 PM

This is a great deal...

RiXst3r · 06-07-2009, 08:00 PM

SOLD.

Thanks everyone!

06-05-2009, 09:34 AM	#1
RiXst3r 288 Rep 6,510 Posts Drives: M235i Join Date: Sep 2006 Location: Ohio iTrader: (14)	FS: procede rev2 un-opened BIMMERPOST / Classifieds Asking Price: None Item Interest i have an un-opened PROcede v3 rev2 that (as a nice guesture) I personally bought back from a customer that sold his car before installing the unit. I originally was going to use this unit on a 135i we were looking at, but we ended up not getting the car... since I can't run 2 procedes on my 335i, I need to sell this one It includes all original parts sealed in their baggies. You will need to purchase the $15 canbus update if you want to make this the same as the newest units (http://www.e90post.com/forums/showthread.php?t=249395) I am selling this here because I personally own this unit, and whoever purchases it will need to update it to the newest maps (free downloads). This is not "new" , but it is unopened and never been installed. SOLD. -Rick Last edited by RiXst3r; 06-08-2009 at 09:26 AM..
	Appreciate 0 Tweet

06-07-2009, 03:51 PM	#2
RiXst3r 288 Rep 6,510 Posts Drives: M235i Join Date: Sep 2006 Location: Ohio iTrader: (14)	I need to sell this, its un-opened, never been installed... I am willing to take offers/trades/etc... This is one hell of a deal, and you can buy with confidence since I am a vendor.
	Appreciate 0

06-07-2009, 05:02 PM	#3
Jonny550 Brigadier General 261 Rep 4,936 Posts Drives: 2012 550i Xdrive Join Date: Feb 2009 Location: Jersey Shore iTrader: (14)	is the v3 rev 2 the competitor for the jb2 or is it like a version 2 of the of the version 3 just asking. __________________ [SIGPIC][/SIGPIC] .
	Appreciate 0

06-07-2009, 05:22 PM	#4
scottp999 Brigadier General 136 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	Version 2 of the procede hardware (the latest version), commonly called REV II. Latest software for that verision is 3.3 maps dated 5/29/2009. So it's a REVII procede that runs the V3 maps. Looks like the harness is not canbus activated, but the wires are cheap and it's a quick update to the harness. Normal e90 price is $945. Rick's offereing for $750, plus you will need the $15 wire update = $765. The only way to get one cheaper is if you are an existing procede customer that originally ordered an older unit from Vishnu. Translation is that it's a good deal for someone buying their first Vishnu product. As far as competition, it's main hardware competitor is JB3 PNP.
	Appreciate 0

06-07-2009, 07:45 PM	#5
to_riffic Lieutenant General 3072 Rep 13,776 Posts Drives: rwd Join Date: Feb 2008 Location: SoCal iTrader: (38)	new or not, its the same ish, cuz in the end the unit is goin in the ecu box, and it wont change the status of the unit itself unless somethin was broken on the unit. i realize u're a vendor but 750/765 is still high for "market value" i've seen this go for as low as 600 shipped, just fyi... __________________ ~loud noises~
	Appreciate 0

06-07-2009, 07:51 PM	#6
lpphreakx06 Professional Moose Racer 325 Rep 7,509 Posts Drives: SG 335i E92 RIP + 2015 SS M3 Join Date: Jul 2008 Location: Bellevue, Wa iTrader: (25)	This is a great deal... __________________ Visit my blog anytime: http://www.sfpayments.com BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM
	Appreciate 0

06-07-2009, 08:00 PM	#7
RiXst3r 288 Rep 6,510 Posts Drives: M235i Join Date: Sep 2006 Location: Ohio iTrader: (14)	SOLD. Thanks everyone!
	Appreciate 0