OEM Emblem Removal Assistance

Sick Speed · 06-09-2009, 01:41 PM

I am installing the Vorsteiner deck lid (extension) and I need to remove the OEM BMW emblem from the rear trunk.

Can anyone tell me how to do this? Is it bolted onto the trunk? I have already attempted dental floss but halfway through the line keep breaking making me think it is bolted into the trunk.

Any help is appreciated.

SS

Craig@SupremePower · 06-09-2009, 01:46 PM

try a CC to get under the edge then use a squeegee or plastic tool if you have them, last resort use a small screw driver against it but be gentle not to far up the badge as you wiggle it off! Good luck..

CV335 · 06-09-2009, 01:49 PM

They are not bolted; there are rubber gromets in the 2 holes where you insert the emblem along with 3M tape. The floss technique didn't worked for me either. I used those thin plastic wrappers (usually white or yello) that most shipper usually employ to secure the top/bottom of heavy boxes. They should have something similar in Lowes or Home Depot.

Sick Speed · 06-09-2009, 01:56 PM

Thanks guys.

SS

06-09-2009, 01:41 PM	#1
Sick Speed Speed 68 Rep 407 Posts Drives: 2008 335i E92 Coupe Join Date: Mar 2007 Location: Parallel Universe iTrader: (2)	OEM Emblem Removal Assistance I am installing the Vorsteiner deck lid (extension) and I need to remove the OEM BMW emblem from the rear trunk. Can anyone tell me how to do this? Is it bolted onto the trunk? I have already attempted dental floss but halfway through the line keep breaking making me think it is bolted into the trunk. Any help is appreciated. SS __________________
	Appreciate 0 Tweet Quote

06-09-2009, 01:46 PM	#2
Craig@SupremePower G.O.A.T.! 1026 Rep 74,992 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	try a CC to get under the edge then use a squeegee or plastic tool if you have them, last resort use a small screw driver against it but be gentle not to far up the badge as you wiggle it off! Good luck..
	Appreciate 0 Quote

06-09-2009, 01:49 PM	#3
CV335 Major 68 Rep 1,209 Posts Drives: '06 MCS Join Date: Oct 2008 Location: TX iTrader: (5)	They are not bolted; there are rubber gromets in the 2 holes where you insert the emblem along with 3M tape. The floss technique didn't worked for me either. I used those thin plastic wrappers (usually white or yello) that most shipper usually employ to secure the top/bottom of heavy boxes. They should have something similar in Lowes or Home Depot.
	Appreciate 0 Quote

06-09-2009, 01:56 PM	#4
Sick Speed Speed 68 Rep 407 Posts Drives: 2008 335i E92 Coupe Join Date: Mar 2007 Location: Parallel Universe iTrader: (2)	Thanks guys. SS __________________
	Appreciate 0 Quote