Any LCI's rubbing with 265's and 35 offset on H&R?

Bavaria330 · 06-04-2009, 02:07 PM

I did search, but came up with conflicting results.
I want to get linea Z2S with an offset of 35, but don't want to roll my fenders.
Has anyone try this setup? Or even 275's?
Thanks.

200Duece · 06-04-2009, 02:09 PM

I think you'll be fine with the fender but will probably rub the liner with the taller 35 ratio and the drop.

I'm running 265/35/19x19.5 et27 and rolled the fender. rubs a little on the RR liner

Zoeb@WheelDude.com · 06-04-2009, 03:05 PM

Quote:

Originally Posted by 200Duece

I think you'll be fine with the fender but will probably rub the liner with the taller 35 ratio and the drop.

I'm running 265/35/19x19.5 et27 and rolled the fender. rubs a little on the RR liner

He'll most likely run a 265.30.19 as that is the proper size

the 35 aspect ratio is a bit tall for a 335i, that's more of a 350z / g35 size

Zoeb

Proper Motion LLC · 06-04-2009, 04:20 PM

I'll get back to you in about a month (hopefully less)

LCI
Eibach Sport Springs
265/35/18 +35 rear Advan RS

Zoeb@WheelDude.com · 06-04-2009, 05:16 PM

Quote:

Originally Posted by 09AlpineTTSedan

I'll get back to you in about a month (hopefully less)

LCI
Eibach Sport Springs
265/35/18 +35 rear Advan RS

9.5" width?

Bavaria330 · 06-04-2009, 05:28 PM

Quote:

Originally Posted by 09AlpineTTSedan

I'll get back to you in about a month (hopefully less)

LCI
Eibach Sport Springs
265/35/18 +35 rear Advan RS

LOL I think I'll bite first! My car should be here in a week or so.

Proper Motion LLC · 06-04-2009, 05:45 PM

Quote:

Originally Posted by Zoeb@WheelDude.com

9.5" width?

Yes

khaye1 · 06-05-2009, 12:22 AM

i'm running 265/30/19 with h&r sport but my offset is et40 and no rubbing issue. I was thinking of putting 5mm spacers but i took measurements and it looks like it's gonna rub. so I might go with 3mm or bite the bullet and roll my fenders and make the wheels super flush. here's the link for the drop http://www.e90post.com/forums/showth...&highlight=lci

ALUFELGEN · 06-05-2009, 01:12 AM

Quote:

Originally Posted by khaye1

i'm running 265/30/19 with h&r sport but my offset is et40 and no rubbing issue. I was thinking of putting 5mm spacers but i took measurements and it looks like it's gonna rub. so I might go with 3mm or bite the bullet and roll my fenders and make the wheels super flush. here's the link for the drop http://www.e90post.com/forums/showth...&highlight=lci

You are correct. You are going to need ET38 or higher on a 19x9.5" for a LCI. Anything lower than ET38 and you`ll most likely rub in the rear fenders.

Hope it helps

Bavaria330 · 06-05-2009, 02:17 PM

Quote:

Originally Posted by khaye1

i'm running 265/30/19 with h&r sport but my offset is et40 and no rubbing issue. I was thinking of putting 5mm spacers but i took measurements and it looks like it's gonna rub. so I might go with 3mm or bite the bullet and roll my fenders and make the wheels super flush. here's the link for the drop http://www.e90post.com/forums/showth...&highlight=lci

Thanks, that is a nice looking ride!
I may have to keep the OEM springs in the rear

khaye1 · 06-05-2009, 04:59 PM

^^ Thanks.

I dont think that's gonna look right...unless you're aiming for that rake look. I say, if you really like the wheels and they only come in et35, go for rolling you fenders.

Zoeb@WheelDude.com · 06-05-2009, 05:10 PM

the wheels are available in a 45mm offset also

Bavaria330 · 06-05-2009, 09:50 PM

Zoeb, on the Z2S do the lips 35/45 offsets have the same depth as the 30/35?
If soo I think I maybe able to get away with 245 up front, and 275 in rear on an LCI with H&R with no fender rolling. what do you think?

Zoeb@WheelDude.com · 06-09-2009, 12:04 AM

Quote:

Originally Posted by Bavaria330

Zoeb, on the Z2S do the lips 35/45 offsets have the same depth as the 30/35?
If soo I think I maybe able to get away with 245 up front, and 275 in rear on an LCI with H&R with no fender rolling. what do you think?

yes, identical lip sizes.

Bavaria330 · 06-10-2009, 10:13 PM

Just Place my order

Will Get
Z2S 45mm 275/30/10 bridgestones RE 960
30mm 245/35/19 bridgestones RE 960
This is for an LCI so perhaps I can add a small spacer, will see.
Also Order H&R sport Springs. Will post pics and see if it rubs up front with the RE 960's and lower springs.

Thanks Zoeb!

06-04-2009, 02:07 PM	#1
Bavaria330 First Lieutenant 52 Rep 321 Posts Drives: 335i LCI AW Join Date: Jun 2006 Location: LB Cali. iTrader: (2)	Any LCI's rubbing with 265's and 35 offset on H&R? I did search, but came up with conflicting results. I want to get linea Z2S with an offset of 35, but don't want to roll my fenders. Has anyone try this setup? Or even 275's? Thanks.
	Appreciate 0 Tweet Quote

06-04-2009, 02:09 PM	#2
200Duece Colonel 45 Rep 2,575 Posts Drives: '73 2002,'18 X5 35d,'17 328d T Join Date: Jan 2007 Location: A Whale's Vagina, Ca iTrader: (5)	I think you'll be fine with the fender but will probably rub the liner with the taller 35 ratio and the drop. I'm running 265/35/19x19.5 et27 and rolled the fender. rubs a little on the RR liner __________________ 1988 E28 535is Euro Conversion --- sold 2009 E90 335 6MT --- sold 2003 E39 540iT Msport --- sold
	Appreciate 0 Quote

06-04-2009, 04:20 PM	#4
Proper Motion LLC Custom Powder Coater 149 Rep 2,784 Posts Drives: White 335i Sedan Join Date: Dec 2008 Location: Orange County CA iTrader: (2)	I'll get back to you in about a month (hopefully less) LCI Eibach Sport Springs 265/35/18 +35 rear Advan RS __________________ www.propermotion714.com
	Appreciate 0 Quote

06-05-2009, 12:22 AM	#8
khaye1 Colonel 161 Rep 2,811 Posts Drives: 24 G87 Join Date: Feb 2009 Location: San Diego iTrader: (8) Garage List [10.00]	i'm running 265/30/19 with h&r sport but my offset is et40 and no rubbing issue. I was thinking of putting 5mm spacers but i took measurements and it looks like it's gonna rub. so I might go with 3mm or bite the bullet and roll my fenders and make the wheels super flush. here's the link for the drop http://www.e90post.com/forums/showth...&highlight=lci __________________
	Appreciate 0 Quote

06-05-2009, 04:59 PM	#11
khaye1 Colonel 161 Rep 2,811 Posts Drives: 24 G87 Join Date: Feb 2009 Location: San Diego iTrader: (8) Garage List [10.00]	^^ Thanks. I dont think that's gonna look right...unless you're aiming for that rake look. I say, if you really like the wheels and they only come in et35, go for rolling you fenders. __________________
	Appreciate 0 Quote

06-05-2009, 05:10 PM	#12
Zoeb@WheelDude.com 380 Rep 11,992 Posts Drives: M3 (e92), X5 (E70), 428i (F32) Join Date: Nov 2006 Location: Fremont, CA iTrader: (45) Garage List 1995 BMW M3 [0.00] 2008 BMW M3 [8.00]	the wheels are available in a 45mm offset also
	Appreciate 0 Quote

06-05-2009, 09:50 PM	#13
Bavaria330 First Lieutenant 52 Rep 321 Posts Drives: 335i LCI AW Join Date: Jun 2006 Location: LB Cali. iTrader: (2)	Zoeb, on the Z2S do the lips 35/45 offsets have the same depth as the 30/35? If soo I think I maybe able to get away with 245 up front, and 275 in rear on an LCI with H&R with no fender rolling. what do you think? Last edited by Bavaria330; 06-07-2009 at 11:14 AM..
	Appreciate 0 Quote

06-10-2009, 10:13 PM	#15
Bavaria330 First Lieutenant 52 Rep 321 Posts Drives: 335i LCI AW Join Date: Jun 2006 Location: LB Cali. iTrader: (2)	Just Place my order Will Get Z2S 45mm 275/30/10 bridgestones RE 960 30mm 245/35/19 bridgestones RE 960 This is for an LCI so perhaps I can add a small spacer, will see. Also Order H&R sport Springs. Will post pics and see if it rubs up front with the RE 960's and lower springs. Thanks Zoeb!
	Appreciate 0 Quote